Security Vulnerabilities
- CVEs Published In June 2025
In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix address sanitizer warning in raid_status
There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid
==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x9c
print_address_description.constprop.0+0x1f/0x1e0
print_report.cold+0x55/0x244
kasan_report+0xc9/0x100
raid_status+0x1747/0x2820 [dm_raid]
dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
table_load+0x35c/0x630 [dm_mod]
ctl_ioctl+0x411/0x630 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
__x64_sys_ioctl+0x12a/0x1a0
do_syscall_64+0x5b/0x80
The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.
However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.
Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.
In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix address sanitizer warning in raid_resume
There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length.
In the Linux kernel, the following vulnerability has been resolved:
block: don't allow the same type rq_qos add more than once
In our test of iocost, we encountered some list add/del corruptions of
inner_walk list in ioc_timer_fn.
The reason can be described as follows:
cpu 0 cpu 1
ioc_qos_write ioc_qos_write
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
...
rq_qos_add(q, rqos);
}
...
rq_qos_add(q, rqos);
...
}
When the io.cost.qos file is written by two cpus concurrently, rq_qos may
be added to one disk twice. In that case, there will be two iocs enabled
and running on one disk. They own different iocgs on their active list. In
the ioc_timer_fn function, because of the iocgs from two iocs have the
same root iocg, the root iocg's walk_list may be overwritten by each other
and this leads to list add/del corruptions in building or destroying the
inner_walk list.
And so far, the blk-rq-qos framework works in case that one instance for
one type rq_qos per queue by default. This patch make this explicit and
also fix the crash above.
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails.
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/reclaim: fix potential memory leak in damon_reclaim_init()
damon_reclaim_init() allocates a memory chunk for ctx with
damon_new_ctx(). When damon_select_ops() fails, ctx is not released,
which will lead to a memory leak.
We should release the ctx with damon_destroy_ctx() when damon_select_ops()
fails to fix the memory leak.
In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pnfs: Fix a use-after-free bug in open
If someone cancels the open RPC call, then we must not try to free
either the open slot or the layoutget operation arguments, since they
are likely still in use by the hung RPC call.
In the Linux kernel, the following vulnerability has been resolved:
net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null
Fixes a NULL pointer derefence bug triggered from tap driver.
When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null
(in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb)
virtio_net_hdr_to_skb calls dev_parse_header_protocol which
needs skb->dev field to be valid.
The line that trigers the bug is in dev_parse_header_protocol
(dev is at offset 0x10 from skb and is stored in RAX register)
if (!dev->header_ops || !dev->header_ops->parse_protocol)
22e1: mov 0x10(%rbx),%rax
22e5: mov 0x230(%rax),%rax
Setting skb->dev before the call in tap.c fixes the issue.
BUG: kernel NULL pointer dereference, address: 0000000000000230
RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap]
Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48
RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010
RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300
RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8
R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6
FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0
Call Trace:
tap_get_user+0x3f1/0x540 [tap]
tap_sendmsg+0x56/0x362 [tap]
? get_tx_bufs+0xc2/0x1e0 [vhost_net]
handle_tx_copy+0x114/0x670 [vhost_net]
handle_tx+0xb0/0xe0 [vhost_net]
handle_tx_kick+0x15/0x20 [vhost_net]
vhost_worker+0x7b/0xc0 [vhost]
? vhost_vring_call_reset+0x40/0x40 [vhost]
kthread+0xfa/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix memleak in aa_simple_write_to_buffer()
When copy_from_user failed, the memory is freed by kvfree. however the
management struct and data blob are allocated independently, so only
kvfree(data) cause a memleak issue here. Use aa_put_loaddata(data) to
fix this issue.
In the Linux kernel, the following vulnerability has been resolved:
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.
In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory leak on the deferred close
xfstests on smb21 report kmemleak as below:
unreferenced object 0xffff8881767d6200 (size 64):
comm "xfs_io", pid 1284, jiffies 4294777434 (age 20.789s)
hex dump (first 32 bytes):
80 5a d0 11 81 88 ff ff 78 8a aa 63 81 88 ff ff .Z......x..c....
00 71 99 76 81 88 ff ff 00 00 00 00 00 00 00 00 .q.v............
backtrace:
[<00000000ad04e6ea>] cifs_close+0x92/0x2c0
[<0000000028b93c82>] __fput+0xff/0x3f0
[<00000000d8116851>] task_work_run+0x85/0xc0
[<0000000027e14f9e>] do_exit+0x5e5/0x1240
[<00000000fb492b95>] do_group_exit+0x58/0xe0
[<00000000129a32d9>] __x64_sys_exit_group+0x28/0x30
[<00000000e3f7d8e9>] do_syscall_64+0x35/0x80
[<00000000102e8a0b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
When cancel the deferred close work, we should also cleanup the struct
cifs_deferred_close.