Linux: >> Linux Kernel >> 2.6.30.9 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
net: af_key: initialize alg_key_len for IPComp states
pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by
allocating x->calg and copying only the algorithm name:
x->calg = kmalloc_obj(*x->calg);
if (!x->calg) {
err = -ENOMEM;
goto out;
}
strcpy(x->calg->alg_name, a->name);
x->props.calgo = sa->sadb_sa_encrypt;
Unlike the authentication (x->aalg) and encryption (x->ealg) branches of
the same function, the compression branch never initializes
calg->alg_key_len. IPComp carries no key and the allocation only
reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field
is left containing uninitialized slab data.
calg->alg_key_len is later used as a length by xfrm_algo_clone() when an
IPComp state is cloned during XFRM_MSG_MIGRATE:
xfrm_state_migrate()
xfrm_state_clone_and_setup()
x->calg = xfrm_algo_clone(orig->calg);
kmemdup(orig, xfrm_alg_len(orig));
where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With
a non-zero garbage alg_key_len, kmemdup() reads past the end of the
68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating
it triggers (net-next, KASAN, init_on_alloc=0):
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60
Read of size 4164 at addr ff11000025a74980 by task diag2/9287
CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xf7/0x600
kasan_report+0xe4/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x44/0x60
xfrm_state_migrate+0x70a/0x1da0
xfrm_migrate+0x753/0x18a0
xfrm_do_migrate+0xb47/0xf10
xfrm_user_rcv_msg+0x411/0xb50
netlink_rcv_skb+0x158/0x420
xfrm_netlink_rcv+0x71/0x90
netlink_unicast+0x584/0x850
netlink_sendmsg+0x8b0/0xdc0
____sys_sendmsg+0x9f7/0xb90
___sys_sendmsg+0x134/0x1d0
__sys_sendmsg+0x16d/0x220
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 9287:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
pfkey_add+0x2652/0x2ea0
pfkey_process+0x6d0/0x830
pfkey_sendmsg+0x42c/0x850
__sys_sendto+0x461/0x4b0
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x116/0x7d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ff11000025a74980
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
allocated 68-byte region [ff11000025a74980, ff11000025a749c4)
Depending on the uninitialized value the same field can instead request
an oversized kmemdup() allocation and make the migration clone fail.
The XFRM netlink path is not affected: verify_one_alg() rejects an
XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via
XFRM_MSG_NEWSA is always self-consistent.
Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place.
CVSS Score
7.0
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked")
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect
Submitted write URBs are not stopped on close() and therefore need to be
stopped unconditionally on disconnect() to avoid use-after-free in the
completion handler.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: ldusb: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked")
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: idmouse: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked")
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix write buffer corruption
The digi_write_inb_command() is supposed to wait for the write urb to
become available or return an error, but instead it updates the transfer
buffer and tries to resubmit the urb on timeout.
To make things worse, for commands like break control where no timeout
is used, the driver would corrupt the urb immediately due to a broken
jiffies comparison (on 32-bit machines this takes five minutes of uptime
to trigger due to INITIAL_JIFFIES).
Fix this by adding the missing return on timeout and waiting
indefinitely when no timeout has been specified as intended.
This issue was (sort of) flagged by Sashiko when reviewing an unrelated
change to the driver.
CVSS Score
7.8
EPSS Score
0.002
Published
2026-07-25
Page 1