In the Linux kernel, the following vulnerability has been resolved:
mm: do file ownership checks with the proper mount idmap
Ever since idmapped mounts were introduced, inode ownership checks (for
side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done
against the nop_mnt_idmap, which completely ignores the file's mount's
idmap. This results in odd edgecases like:
1) mount/bind-mount with an idmap userA:userB:1
2) userB runs an owner_or_capable() check on file that is owned by userA
on-disk/in-memory, but owned by userB after idmap translation
3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied
In the case of mincore/madvise MADV_PAGEOUT, this is usually benign,
because file_permission(file, MAY_WRITE) will probably succeed, as it uses
the proper idmap internally, but it does not need to be the case on e.g a
0444 file where even the owner itself doesn't have permissions to write to
it.
Since this is clearly not trivial to get right, introduce a
file_owner_or_capable() that can carry the correct semantics, and switch
the various users in mm to it.
The issue was found by manual code inspection & an off-list discussion
with Jan Kara.
In the Linux kernel, the following vulnerability has been resolved:
exfat: bound uniname advance in exfat_find_dir_entry()
In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the
output pointer by a fixed amount while the loop guard only tracks the
accumulated name length:
if (++order == 2)
uniname = p_uniname->name;
else
uniname += EXFAT_FILE_NAME_LEN;
len = exfat_extract_uni_name(ep, entry_uniname);
name_len += len;
unichar = *(uniname+len);
*(uniname+len) = 0x0;
uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len
grows only by the actual extracted length, which is shorter when a name
fragment contains an early NUL. The only guard is
`name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short
name fragments lets uniname run far past the
p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small,
causing an out-of-bounds read and write at *(uniname+len).
The sibling extractor exfat_get_uniname_from_ext_entry() already stops
on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard
added in commit d42334578eba ("exfat: check if filename entries exceeds
max filename length")); exfat_find_dir_entry() never got the
equivalent. Track the per-entry write offset as a count and reject a
fragment once the offset, or the offset plus the extracted length, would
exceed MAX_NAME_LENGTH, before forming the output pointer.
In the Linux kernel, the following vulnerability has been resolved:
module: decompress: check return value of module_extend_max_pages()
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
[Sami: Corrected the analysis in the commit message.]
In the Linux kernel, the following vulnerability has been resolved:
NFSv4: include MAY_WRITE in open permission mask for O_TRUNC
POSIX requires write permission to truncate a file, so an open() that
specifies O_TRUNC must be authorized for write access regardless of the
O_ACCMODE access mode.
nfs_open_permission_mask() builds the access mask passed to
nfs_may_open(), which is the local authorization gate for OPENs the
client serves itself from a cached write delegation via the
can_open_delegated() path in nfs4_try_open_cached(). The mask is
derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a
file the caller cannot write requests only MAY_READ and passes the
local check. The OPEN is then satisfied locally and the truncation is
issued to the server as a SETATTR(size=0) over the delegation stateid,
which the server accepts under standard write-delegation semantics.
POSIX requires that this open fail with EACCES.
Include MAY_WRITE in the mask whenever O_TRUNC is set so the local
check matches the access the server would have enforced.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: bound Read Response placement to the RREAD length
In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each
inbound Read Response DDP segment at sge->laddr + wqe->processed and then
accumulates wqe->processed, but it never checks the running total against
the sink buffer length on continuation segments. siw_check_sge() resolves
and validates the sink memory only on the first fragment (the if (!*mem)
branch), and siw_rresp_check_ntoh() compares the cumulative length against
wqe->bytes only on the final segment (the !frx->more_ddp_segs guard).
A connected siw peer that answers an outstanding RREAD with Read Response
segments that keep the DDP Last flag clear, carrying more total payload
than the RREAD requested, drives wqe->processed past the validated sink
buffer; the next siw_rx_data() call writes out of bounds at
sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP,
so the peer is the remote end of an established RDMA connection and needs
no local privilege.
Bound every segment before placement, exactly as siw_proc_send() and
siw_proc_write() already do for their tagged and untagged paths, and
terminate the connection with a base-or-bounds DDP error when the
Read Response would overrun the sink buffer.
This is the second receive-path length fix for this file. A separate
change rejects an MPA FPDU length that underflows the per-fragment
remainder in the header decode; that guard does not cover this case,
because here each individual segment length is self-consistent and only
the accumulated placement offset overruns the buffer.
In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before returning from fuse_ref_folio()
fuse_ref_folio() unlocks the request but does not re-lock it before
returning. fuse_chan_abort() can end the request and the async end
callback (eg fuse_writepage_free()) can free the args while the
subsequent copy chain logic after fuse_ref_folio() accesses them,
leading to use-after-free issues.
Fix this by locking the request in fuse_ref_folio() before returning.
In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
In the Linux kernel, the following vulnerability has been resolved:
MIPS: DEC: Prevent initial console buffer from landing in XKPHYS
In 64-bit configurations calling the initial console output handler from
a kernel thread other than the initial one will result in a situation
where the stack has been placed in the XKPHYS 64-bit memory segment and
consequently so has been the buffer allocated there that is used as the
argument corresponding to the `%s' output conversion specifier for the
firmware's printf() entry point.
This 64-bit address will then be truncated by 32-bit firmware, resulting
in an attempt to access the wrong memory location, which in turn will
cause all kinds of unpredictable behaviour, such as a kernel crash:
Console: colour dummy device 160x64
Calibrating delay loop... 49.36 BogoMIPS (lpj=192512)
pid_max: default: 32768 minimum: 301
CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800
Oops[#1]:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121
$ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0
$ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073
$ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473
$12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000
$16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240
$20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b
$24 : ffffffffffffffbf 000000000203bd00
$28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800
Hi : 0000000000000000
Lo : 0000000000000aa8
epc : ffffffffbfc08364 0xffffffffbfc08364
ra : ffffffffbfc08800 0xffffffffbfc08800
Status: 140120e2 KX SX UX KERNEL EXL
Cause : 00000008 (ExcCode 02)
BadVA : 000000000203bd00
PrId : 00000430 (R4000SC)
Modules linked in:
Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d
80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38
0000000000000000 000000000203bd00 0000000000000000 0000000000000000
0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000002500000000 0000000000000000 0000000000000000 802c1a7400000000
0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172
6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320
806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000
...
Call Trace:
Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8)
>>
In this case the pointer in $4 was truncated from 0x980000000203bd00 to
0x000000000203bd00.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started.
Fix the issue by making the buffer static and initdata, and therefore
placed in the CKSEG0 32-bit compatibility segment, observing that the
console output handler is called with the console lock held, implying
no need for this code to be reentrant. Add an assertion to verify the
buffer actually has been placed in a compatibility segment.
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: don't dump registers past the mapped region
On DSI 6G platforms the IO address space is internally adjusted by
io_offset. Later this adjusted address might be used for memory dumping.
However the size that is used for memory dumping isn't adjusted to
account for the io_offset, leading to the potential access to the
unmapped region. Lower ctrl_size by the io_offset value to prevent
access past the mapped area.
msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P)
msm_dsi_host_snapshot+0x4c/0x78 [msm]
msm_dsi_snapshot+0x28/0x50 [msm]
msm_disp_snapshot_capture_state+0x74/0x140 [msm]
msm_disp_snapshot_state_sync+0x60/0x90 [msm]
_msm_disp_snapshot_work+0x30/0x90 [msm]
kthread_worker_fn+0xdc/0x460
kthread+0x120/0x140
Patchwork: https://patchwork.freedesktop.org/patch/721747/
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: pch_uart: add check for dma_alloc_coherent()
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails.