Linux: >> Linux Kernel >> 4.14.206 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: avoid use of uninit sender vars
batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the
BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it
proceeds to read sender-only members that were never initialized, leading
to undefined behavior.
This can be triggered when a node that is currently acting as a receiver in
an ongoing tp_meter session receives a malicious ACK packet.
Guard against this by checking tp_vars->role immediately after the
lookup and bailing out if it is not BATADV_TP_SENDER, before any of
those members are accessed.
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tvlv: reject oversized TVLV packets
batadv_tvlv_container_ogm_append() builds a TVLV packet section from
the tvlv.container_list. The total size of this section is computed by
batadv_tvlv_container_list_size(), which sums the sizes of all registered
containers.
The return type and accumulator in batadv_tvlv_container_list_size() were
u16. If the accumulated size exceeds U16_MAX, the value wraps around,
causing the subsequent allocation in batadv_tvlv_container_ogm_append()
to be undersized. The memcpy-style copy that follows would then write
beyond the end of the allocated buffer, corrupting kernel memory.
Fix this by widening the return type of batadv_tvlv_container_list_size()
to size_t. In batadv_tvlv_container_ogm_append(), check the computed length
against U16_MAX before proceeding, and bail out as if the allocation had
failed when the limit is exceeded.
CVSS Score
8.8
EPSS Score
0.002
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
crypto: jitterentropy - replace long-held spinlock with mutex
jent_kcapi_random() serializes the shared jitterentropy state, but it
currently holds a spinlock across the jent_read_entropy() call. That
path performs expensive jitter collection and SHA3 conditioning, so
parallel readers can trigger stalls as contending waiters spin for
the same lock.
To prevent non-preemptible lock hold, replace rng->jent_lock with a
mutex so contended readers sleep instead of spinning on a shared lock
held across expensive entropy generation.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: stop hash:* range iteration at end
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: handle forward allocation error
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
vrf: Fix a potential NPD when removing a port from a VRF
RCU readers that identified a net device as a VRF port using
netif_is_l3_slave() assume that a subsequent call to
netdev_master_upper_dev_get_rcu() will return a VRF device. They then
continue to dereference its l3mdev operations.
This assumption is not always correct and can result in a NPD [1]. There
is no RCU synchronization when removing a port from a VRF, so it is
possible for an RCU reader to see a new master device (e.g., a bridge)
that does not have l3mdev operations.
Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVE
flag. Skip this synchronization when a net device is removed from a VRF
as part of its deletion and when the VRF device itself is deleted. In
the latter case an RCU grace period will pass by the time RTNL is
released.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181)
[...]
Call Trace:
<TASK>
l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189)
__inet_bind (net/ipv4/af_inet.c:499 (discriminator 3))
inet_bind_sk (net/ipv4/af_inet.c:469)
__sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1))
__x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: clear current gateway during teardown
batadv_gw_node_free() removes the gateway list entries during mesh teardown,
but it does not clear the currently selected gateway. This leaves stale
gateway state behind across cleanup and can break a later mesh recreation.
Clear bat_priv->gw.curr_gw before walking the gateway list so the selected
gateway reference is dropped as part of teardown.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: stop OGMv2 on disabled interface
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24