Linux: >> Linux Kernel >> 4.14.315 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>.
CVSS Score
9.8
EPSS Score
0.006
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
bonding: 3ad: implement proper RCU rules for port->aggregator
syzbot found a data-race in bond_3ad_get_active_agg_info /
bond_3ad_state_machine_handler [1] which hints at lack of proper
RCU implementation.
Add __rcu qualifier to port->aggregator, and add proper RCU API.
[1]
BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler
write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0:
ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline]
bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569
process_one_work kernel/workqueue.c:3302 [inline]
process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385
worker_thread+0x58a/0x780 kernel/workqueue.c:3466
kthread+0x22a/0x280 kernel/kthread.c:436
ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1:
__bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline]
bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881
bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853
rtnl_link_info_fill net/core/rtnetlink.c:906 [inline]
rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927
rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168
rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453
rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline]
rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495
__dev_notify_flags+0x76/0x390 net/core/dev.c:9790
netif_change_flags+0xac/0xd0 net/core/dev.c:9823
do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180
rtnl_group_changelink net/core/rtnetlink.c:3813 [inline]
__rtnl_newlink net/core/rtnetlink.c:3981 [inline]
rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109
rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995
netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550
rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x563/0x5b0 net/socket.c:2698
___sys_sendmsg+0x195/0x1e0 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787
x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000000 -> 0xffff88813cf5c400
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
neigh: let neigh_xmit take skb ownership
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb.
CVSS Score
7.5
EPSS Score
0.005
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix.
CVSS Score
9.8
EPSS Score
0.005
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Cap AEAD AD length to 0x80000000
In order to prevent arithmetic overflows when checking the TX
buffer size, cap the associated data length to 0x80000000.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix a buffer leak in __ceph_setxattr()
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI endpoint descriptor scans
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
libceph: handle rbtree insertion error in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ]
CVSS Score
7.5
EPSS Score
0.005
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in crush_decode()
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-06-24