Linux: >> Linux Kernel >> 6.12.95 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Reassign nested_mmus array behind mmu_lock
kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the
MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which
can run at any time. kvm_vcpu_init_nested() reallocates the array and frees
the old buffer while holding only kvm->arch.config_lock, so such a walker
can reference the freed array.
Allocate the new array outside of mmu_lock, as the allocation can sleep.
Under the lock, copy the existing entries, fix up the back pointers and
reassign the array. Free the old buffer after dropping the lock, as
kvfree() can sleep as well.
CVSS Score
8.8
EPSS Score
0.001
Published
2026-06-09
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: use list_del_rcu for netlink hooks
nft_netdev_unregister_hooks and __nft_unregister_flowtable_net_hooks need
to use list_del_rcu(), this list can be walked by concurrent dumpers.
Add a new helper and use it consistently.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-09
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject empty multisync extension to prevent infinite loop
v3d_get_extensions() walks a userspace-provided singly-linked list of
ioctl extensions without any bound on the chain length. A local user
can craft a self-referential extension (ext->next == &ext) with zero
in_sync_count and out_sync_count, which bypasses the existing duplicate-
extension guard:
if (se->in_sync_count || se->out_sync_count)
return -EINVAL;
The guard never fires because v3d_get_multisync_post_deps() returns
immediately when count is zero, leaving both fields at zero on every
iteration. The result is an infinite loop in kernel context, blocking
the calling thread and pegging a CPU core indefinitely.
Fix this by rejecting a multisync extension where both in_sync_count
and out_sync_count are zero in v3d_get_multisync_submit_deps(). An
empty multisync carries no synchronization information and serves no
useful purpose, so returning -EINVAL for such an extension is the
correct defense against this attack vector.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
selinux: allow multiple opens of /sys/fs/selinux/policy
Currently there can only be a single open of /sys/fs/selinux/policy at
any time. This allows any process to block any other process from
reading the kernel policy. The original motivation seems to have been
a mix of preventing an inconsistent view of the policy size and
preventing userspace from allocating kernel memory without bound, but
this is arguably equally bad. Eliminate the policy_opened flag and
shrink the critical section that the policy mutex is held. While we
are making changes here, drop a couple of extraneous BUG_ONs.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
mm/alloc_tag: clear codetag for pages allocated before page_ext initialization
Due to initialization ordering, page_ext is allocated and initialized
relatively late during boot. Some pages have already been allocated and
freed before page_ext becomes available, leaving their codetag
uninitialized.
A clear example is in init_section_page_ext(): alloc_page_ext() calls
kmemleak_alloc(). If the slab cache has no free objects, it falls back to
the buddy allocator to allocate memory. However, at this point page_ext
is not yet fully initialized, so these newly allocated pages have no
codetag set. These pages may later be reclaimed by KASAN, which causes
the warning to trigger when they are freed because their codetag ref is
still empty.
Use a global array to track pages allocated before page_ext is fully
initialized. The array size is fixed at 8192 entries, and will emit a
warning if this limit is exceeded. When page_ext initialization
completes, set their codetag to empty to avoid warnings when they are
freed later.
This warning is only observed with CONFIG_MEM_ALLOC_PROFILING_DEBUG=Y and
mem_profiling_compressed disabled:
[ 9.582133] ------------[ cut here ]------------
[ 9.582137] alloc_tag was not set
[ 9.582139] WARNING: ./include/linux/alloc_tag.h:164 at __pgalloc_tag_sub+0x40f/0x550, CPU#5: systemd/1
[ 9.582190] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 7.0.0-rc4 #1 PREEMPT(lazy)
[ 9.582192] Hardware name: Red Hat KVM, BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 9.582194] RIP: 0010:__pgalloc_tag_sub+0x40f/0x550
[ 9.582196] Code: 00 00 4c 29 e5 48 8b 05 1f 88 56 05 48 8d 4c ad 00 48 8d 2c c8 e9 87 fd ff ff 0f 0b 0f 0b e9 f3 fe ff ff 48 8d 3d 61 2f ed 03 <67> 48 0f b9 3a e9 b3 fd ff ff 0f 0b eb e4 e8 5e cd 14 02 4c 89 c7
[ 9.582197] RSP: 0018:ffffc9000001f940 EFLAGS: 00010246
[ 9.582200] RAX: dffffc0000000000 RBX: 1ffff92000003f2b RCX: 1ffff110200d806c
[ 9.582201] RDX: ffff8881006c0360 RSI: 0000000000000004 RDI: ffffffff9bc7b460
[ 9.582202] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff3a62324
[ 9.582203] R10: ffffffff9d311923 R11: 0000000000000000 R12: ffffea0004001b00
[ 9.582204] R13: 0000000000002000 R14: ffffea0000000000 R15: ffff8881006c0360
[ 9.582206] FS: 00007ffbbcf2d940(0000) GS:ffff888450479000(0000) knlGS:0000000000000000
[ 9.582208] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.582210] CR2: 000055ee3aa260d0 CR3: 0000000148b67005 CR4: 0000000000770ef0
[ 9.582211] PKRU: 55555554
[ 9.582212] Call Trace:
[ 9.582213] <TASK>
[ 9.582214] ? __pfx___pgalloc_tag_sub+0x10/0x10
[ 9.582216] ? check_bytes_and_report+0x68/0x140
[ 9.582219] __free_frozen_pages+0x2e4/0x1150
[ 9.582221] ? __free_slab+0xc2/0x2b0
[ 9.582224] qlist_free_all+0x4c/0xf0
[ 9.582227] kasan_quarantine_reduce+0x15d/0x180
[ 9.582229] __kasan_slab_alloc+0x69/0x90
[ 9.582232] kmem_cache_alloc_noprof+0x14a/0x500
[ 9.582234] do_getname+0x96/0x310
[ 9.582237] do_readlinkat+0x91/0x2f0
[ 9.582239] ? __pfx_do_readlinkat+0x10/0x10
[ 9.582240] ? get_random_bytes_user+0x1df/0x2c0
[ 9.582244] __x64_sys_readlinkat+0x96/0x100
[ 9.582246] do_syscall_64+0xce/0x650
[ 9.582250] ? __x64_sys_getrandom+0x13a/0x1e0
[ 9.582252] ? __pfx___x64_sys_getrandom+0x10/0x10
[ 9.582254] ? do_syscall_64+0x114/0x650
[ 9.582255] ? ksys_read+0xfc/0x1d0
[ 9.582258] ? __pfx_ksys_read+0x10/0x10
[ 9.582260] ? do_syscall_64+0x114/0x650
[ 9.582262] ? do_syscall_64+0x114/0x650
[ 9.582264] ? __pfx_fput_close_sync+0x10/0x10
[ 9.582266] ? file_close_fd_locked+0x178/0x2a0
[ 9.582268] ? __x64_sys_faccessat2+0x96/0x100
[ 9.582269] ? __x64_sys_close+0x7d/0xd0
[ 9.582271] ? do_syscall_64+0x114/0x650
[ 9.582273] ? do_syscall_64+0x114/0x650
[ 9.582275] ? clear_bhb_loop+0x50/0xa0
[ 9.582277] ? clear_bhb_l
---truncated---
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
coresight: tmc-etr: Fix race condition between sysfs and perf mode
When trying to run perf and sysfs mode simultaneously, the WARN_ON()
in tmc_etr_enable_hw() is triggered sometimes:
WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc]
[..snip..]
Call trace:
tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc]
coresight_enable_path+0x1c8/0x218 [coresight]
coresight_enable_sysfs+0xa4/0x228 [coresight]
enable_source_store+0x58/0xa8 [coresight]
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x120/0x1b8
vfs_write+0x2c8/0x388
ksys_write+0x74/0x108
__arm64_sys_write+0x24/0x38
el0_svc_common.constprop.0+0x64/0x148
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Since the enablement of sysfs mode is separeted into two critical regions,
one for sysfs buffer allocation and another for hardware enablement, it's
possible to race with the perf mode. Fix this by double check whether
the perf mode's been used before enabling the hardware in sysfs mode.
mode:
[sysfs mode] [perf mode]
tmc_etr_get_sysfs_buffer()
spin_lock(&drvdata->spinlock)
[sysfs buffer allocation]
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
drvdata->etr_buf = etr_perf->etr_buf
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at
the perf side
spin_unlock(&drvdata->spinlock)
With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf.
This ensures we verify whether the perf mode's already running before we
actually allocate the buffer. Then we can save the time of
allocating/freeing the sysfs buffer if race with the perf mode.
CVSS Score
4.7
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs:
prevent stack overflows from page cache allocation").
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix locking in regulator_resolve_supply() error path
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dc_link NULL handling in HPD init
amdgpu_dm_hpd_init() may see connectors without a valid dc_link.
The code already checks dc_link for the polling decision, but later
unconditionally dereferences it when setting up HPD interrupts.
Assign dc_link early and skip connectors where it is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()
error: we previously assumed 'dc_link' could be null (see line 931)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c
923 /*
924 * Analog connectors may be hot-plugged unlike other connector
925 * types that don't support HPD. Only poll analog connectors.
926 */
927 use_polling |=
928 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed
929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id);
930
931 dc_link = amdgpu_dm_connector->dc_link;
dc_link assigned here.
932
933 /*
934 * Get a base driver irq reference for hpd ints for the lifetime
935 * of dm. Note that only hpd interrupt types are registered with
936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
937 * hpd_rx isn't available. DM currently controls hpd_rx
938 * explicitly with dc_interrupt_set()
939 */
--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here.
941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
942 /*
943 * TODO: There's a mismatch between mode_info.num_hpd
944 * and what bios reports as the # of connectors with hpd
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03