In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow.
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix buffer over-read in rtw_update_protection
rtw_update_protection() is called with a pointer offset into the
ies buffer but the full ie_length is passed, causing a potential
buffer over-read.
In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path.
In the Linux kernel, the following vulnerability has been resolved:
mptcp: allow subflow rcv wnd to shrink
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting.
In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above.
In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed.
In the Linux kernel, the following vulnerability has been resolved:
fuse: reject fuse_notify() pagecache ops on directories
The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the
FUSE daemon to actively write/read pagecache contents.
For directories with FOPEN_CACHE_DIR, the pagecache is used as
kernel-internal cache storage, and userspace is not supposed to have
direct access to this cache - in particular, fuse_parse_cache() will hit
WARN_ON() if the cache contains bogus data.
Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than
regular files with -EINVAL.
In the Linux kernel, the following vulnerability has been resolved:
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()
computes the login request payload length as wc->byte_len minus
ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.
A remote iSER initiator can post a login Send work request carrying
fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows
and login_req_len becomes negative.
isert_rx_login_req() then reads that negative length back into a signed
int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the
min() is signed it keeps the negative value; the value is then passed as
the memcpy() length and sign-extended to a multi-gigabyte size_t. The
copy into the 8192-byte login->req_buf runs far out of bounds and
faults, crashing the target node. The login phase precedes iSCSI
authentication, so no credentials are required to reach this path.
Reject any login PDU shorter than ISER_HEADERS_LEN before the
subtraction, mirroring the existing early return on a failed work
completion, so login_req_len can never go negative. The upper bound was
already safe: a posted login buffer cannot deliver more than
ISER_RX_PAYLOAD_SIZE, so the difference stays at or below
MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing
lower bound needs to be added.
In the Linux kernel, the following vulnerability has been resolved:
fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios
FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios
can contain uninitialized data.
Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already
in the page cache and not wait for data from the FUSE daemon, treat
!uptodate folios as if they weren't present.
This only has security impact on systems that don't enable automatic
zero-initialization of all page allocations via
CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.