Linux: >> Linux Kernel >> 5.15.160 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()
Three IE/attribute parsing functions have missing bounds checks.
rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.
rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.
Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.
CVSS Score
8.8
EPSS Score
0.003
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()
Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:
- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.
- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.
Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.
Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end.
CVSS Score
8.1
EPSS Score
0.003
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop
The IE parsing loop in update_beacon_info() advances by
(pIE->length + 2) each iteration but only guards on i < len.
When a malicious AP sends a Beacon whose last IE has only one byte
remaining in the frame (the element_id byte lands at len-1), the loop
reads pIE->length from one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond len, passing a truncated IE
to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past len.
Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length
for consistency with the sizeof(*pIE) guards added above.
CVSS Score
8.1
EPSS Score
0.003
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
NTB: epf: Avoid calling pci_irq_vector() from hardirq context
ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive
the vector number. pci_irq_vector() calls msi_get_virq() that takes a
mutex and can therefore trigger "scheduling while atomic" splats:
BUG: scheduling while atomic: kworker/u33:0/55/0x00010001
...
Call trace:
...
schedule+0x38/0x110
schedule_preempt_disabled+0x28/0x50
__mutex_lock.constprop.0+0x848/0x908
__mutex_lock_slowpath+0x18/0x30
mutex_lock+0x4c/0x60
msi_domain_get_virq+0xe8/0x138
pci_irq_vector+0x2c/0x60
ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf]
__handle_irq_event_percpu+0x70/0x3a8
handle_irq_event+0x48/0x100
handle_edge_irq+0x100/0x1c8
...
Cache the Linux IRQ number for vector 0 when vectors are allocated and
use it as a base in the ISR. Running the ISR in a threaded IRQ handler
would also avoid the problem, but that would be unnecessary here.
CVSS Score
7.5
EPSS Score
0.005
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns
In the analysis pass of $LogFile journal replay, log_replay() copies
LCNs from each action log record into an existing Dirty Page Table
(DPT) entry without bounding the destination index. A crafted NTFS
image with DPT entry lcns_follow=1 and an action log record with
lcns_follow=2 produces a kernel slab out-of-bounds write at mount
time:
BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60
Write of size 8 at addr ffff8880095e1040 by task mount
Two attacker-controlled fields can drive j+i past the allocated
page_lcns[] array:
1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow.
2. lrh->target_vcn may be smaller than dp->vcn, making the u64
subtraction wrap to a huge size_t.
Validate target VCN delta and per-record LCN count against the
DPT entry capacity, bail via the existing out: cleanup label with
-EINVAL.
This mirrors the bounds-check pattern added in commit b2bc7c44ed17
("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot")
and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used in
journal-replay file record check").
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
audit: Fix data races of skb_queue_len() readers on audit_queue
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
[PM: line length tweak]
CVSS Score
8.2
EPSS Score
0.003
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: remove multicast group from hash table on device destruction
When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through
the multicast list and calls ip_ma_put() on each membership, scheduling
them for RCU reclamation. However, they are not unlinked from the device's
multicast hash table (mc_hash).
Since the device remains published in dev->ip_ptr until after
ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash
can still locate and access the multicast group after its refcount is
decremented. If the RCU callback runs and frees the group while a reader is
accessing it, a use-after-free occurs.
Fix this by unlinking the multicast group from mc_hash using
ip_mc_hash_remove() before scheduling it for reclamation.
BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0
Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276
Call Trace:
<IRQ>
dump_stack_lvl+0x67/0x90
print_report+0x175/0x7c0
kasan_report+0x147/0x180
ip_check_mc_rcu+0x149/0x3f0
udp_v4_early_demux+0x36d/0x12d0
ip_rcv_finish_core+0xb8b/0x1390
ip_rcv_finish+0x54/0x120
NF_HOOK+0x213/0x2b0
__netif_receive_skb+0x126/0x340
process_backlog+0x4f2/0xf00
__napi_poll+0x92/0x2c0
net_rx_action+0x583/0xc60
handle_softirqs+0x236/0x7f0
do_softirq+0x57/0x80
</IRQ>
Allocated by task 2239:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x72/0x90
____ip_mc_inc_group+0x31a/0xa40
__ip_mc_join_group+0x334/0x3f0
do_ip_setsockopt+0x16fa/0x2010
ip_setsockopt+0x3f/0x90
do_sock_setsockopt+0x1ad/0x300
Freed by task 0:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x40/0x50
__kasan_slab_free+0x3a/0x60
__rcu_free_sheaf_prepare+0xd4/0x220
rcu_free_sheaf+0x36/0x190
rcu_core+0x8d9/0x12f0
handle_softirqs+0x236/0x7f0
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25