Linux: >> Linux Kernel >> 6.4.13 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:
- directly, for the iExtension string-descriptor fixup loop;
- indirectly, four times via uvc_copy_descriptors() (once per speed),
where the helper iterates uvc->desc.extension_units (which aliases
&opts->extension_units) to size and emit XU descriptors.
The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations. A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.
Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label. This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.
Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: pch_uart: add check for dma_alloc_coherent()
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - validate firmware size before use
Ensure that the firmware file is large enough to contain the expected
number of pages and the signature (which resides at the end of the
firmware blob) before accessing them to prevent potential out-of-bounds
reads.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: add bounds check to cgx_speed_mbps index
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: avoid double free of pool->stack on AQ init failure
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware.
CVSS Score
7.0
EPSS Score
0.001
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix overrun check in netfs_extract_user_iter()
Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills
pages[], then those pages don't get included in the iterator constructed at
the end of the function. If there was an overfill, memory corruption has
already happened.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the
function so we have it after we freed the link.
But the link pointer can be NULL, and is not checked when the fw_id is
stored.
Fix it by simply freeing the link at the end of the function.
fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()")
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-24
In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-20
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-20
In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-20