In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired.
In the Linux kernel, the following vulnerability has been resolved:
xfs: fail recovery on a committed log item with no regions
If the first op of a transaction is a bare transaction header
(len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans()
adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and
ri_buf == NULL.
The header can be split across op records, so later ops may still add
regions; the item is only invalid if the transaction commits with none.
The runtime commit path never emits such a transaction, so this only
happens on a crafted log. It came from an AI-assisted code audit of the
recovery parser.
xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads
*(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL
ri_buf. Reject it there, before the commit handlers that also read
ri_buf[0].
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836)
xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043)
xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501)
xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244)
xlog_recover (fs/xfs/xfs_log_recover.c:3493)
xfs_log_mount (fs/xfs/xfs_log.c:618)
xfs_mountfs (fs/xfs/xfs_mount.c:1034)
xfs_fs_fill_super (fs/xfs/xfs_super.c:1938)
vfs_get_tree (fs/super.c:1695)
path_mount (fs/namespace.c:4161)
__x64_sys_mount (fs/namespace.c:4367)
In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix race between dump and ip_set_list resize
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write().
In the Linux kernel, the following vulnerability has been resolved:
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a
"WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the
VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by
"BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when
reclaim gets to call shrink_huge_zero_folio_scan().
It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and
indeed, whereas pte_special() and pte_mkspecial() are subject to a
dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial()
are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on
any 32-bit architecture.
While the problem was exposed through commit d80a9cb1a64a
("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an
oversight in commit af38538801c6 ("mm/memory: factor out common code from
vm_normal_page_*()") and would result in other problems:
* huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and
numamaps as file-backed THP
* folio_walk_start() returning the folio even without FW_ZEROPAGE set.
Callers seem to tolerate that, though.
... and triggering the VM_WARN_ON_ONE(), although never reported so far.
To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider
whether pmd_special/pud_special is actually implemented.
In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: fix memory block reference leak in poison accounting
memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison.
In the Linux kernel, the following vulnerability has been resolved:
efi: Allocate runtime workqueue before ACPI init
Since commit
5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")
ACPI PRM calls are delegated to a workqueue which runs in a kernel
thread, making it easier to detect and mitigate faulting memory accesses
performed by the firmware.
Rafael reports that such PRM accesses may occur before efisubsys_init()
executes, which is where the workqueue is allocated, leading to NULL
pointer dereferences. Since acpi_init() [which triggers the early PRM
accesses] executes as a subsys_initcall() as well, and has its own
dependencies that may be sensitive to initcall ordering, deferring
acpi_init() is not an option.
So instead, split off the workqueue allocation into its own postcore
initcall, as this is the only missing piece to allow EFI runtime calls
to be made. This ensures that EFI runtime call (including PRM calls) are
accessible to all code running at subsys_initcall() level.