Security Vulnerabilities
In NLnet Labs Unbound 1.13.2 up to and including 1.25.1, stub or forward zones where the name is below an intermediate labed below a DNSSEC signed zone could be shadowed by the intermediate label's secure NXDOMAIN answer from the parent. This is caused by an off-by-one error in 'harden-below-nxdomain' logic; enabled by default. It effectively bypasses the configuration and the configured stub/forward zone is never contacted. 'harden-below-nxdomain' does an upward DNS cache walk together with a delegation point guard that does not allow NXDOMAIN synthesis above stub/forward zones. The guard tests the domain name but before stripping a label. This results in an iteration where the domain name equals the configured stub/forward zone apex that passes the guard, strips one more label, and probes the cache at the apex's immediate public parent. If that parent has a cached DNSSEC-secure NXDOMAIN, which it will for any private namespace nested two or more labels under a signed public name, the walk returns it and the configured stub/forward upstream is never contacted. This can only be triggered by the query for the intermediate label (between the stub/forward apex and the DNSSEC parent zone).
CVSS Score
3.7
EPSS Score
0.002
Published
2026-07-22
In NLnet Labs Unbound 1.7.0 up to and including 1.25.1, insufficient validation of the RRSIG.Labels field combined with premature cache writes during RFC 8198 aggressive NSEC processing leads to cache poisoning that permits a malicious actor controlling a single delegated zone to poison arbitrary sibling zones under NSEC-signed parent domains. A malicious actor with one registered domain under an NSEC-signed TLD can serve malicious insecure DNS responses for unrelated sibling domains (sharing the same parent zone). Arbitrary delegations that do not exist under the parent domain and are covered by the parent's NSEC chain can be brought into insecure existence by fraudulent wildcard DS records (less labels than expected, unknown algorithm) from the malicious sibling domain. This allows the malicious actor to inject insecure wildcard records for those delegations.
CVSS Score
7.5
EPSS Score
0.002
Published
2026-07-22
In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, a replay of a wildcard rrset as another piece of data, could be briefly considered DNSSEC secure based only on the RRSIG validation and stored into cache, before later validation treats it as bogus based on NSEC validation. When the resolving thread puts secure on the rrset, and another thread that is on the serve expired path then picks up the updated rrset contents with the secure status for a reply, it can be used to change a specific record, next to a wildcard that could be covered by the wildcard, into the wildcard. A malicious actor can exploit the possible poisonous effect by having any DNSSEC-singed domain (irrelevant to the victim domain) and a CNAME wrapper record that points to a record next to a wildcard (that could be covered by the wildcard). Then quering Unbound for the wildcard sibling record would seed the secure message. A later (after expiry) query for the CNAME wrapper would need to resolve the target sibling record. If the wildcard replay is injected into the response, the wildcard rrset will update the expired sibling record with a secure status before completing proper wildcard validation with NSEC records and eventually treating the CNAME wrapper answer as bogus. The updated poisoned rrset is now secure and points to the wildcard. This vulnerability is explicit for the serve expired path and needs injection of the signed wildcard rrset without the NSEC accompanying rrset.
CVSS Score
3.7
EPSS Score
0.002
Published
2026-07-22
In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, a single client query for a deeply nested name under a DNSSEC-signed parent can cause Unbound to send more upstream packets per client query than the configured 'max-global-quota'. This effectively bypasses a security configuration that limits upstream amplification traffic.
CVSS Score
5.3
EPSS Score
0.003
Published
2026-07-22
In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, when downstream DNS-over-QUIC (DoQ) is enabled, the first two bidirectional streams on a new QUIC connection (stream_id 0 and 4) bypass the per-stream 'quic-size' gate entirely, and large input buffers are allocated later, after only the 2-byte length prefix has been received from the initial streams. As a result, a remote client can make Unbound exceed the configured 'quic-size' limit with low-cost input. Using only one connection and two streams, each sending a declared 65535-byte length prefix and then holding the streams open, a client can already trivially make Unbound roughly allocate double that amount. This is a remote availability issue / memory-accounting bypass in the downstream DoQ implementation that leads to denial of service for new DoQ clients. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces.
CVSS Score
7.5
EPSS Score
0.003
Published
2026-07-22
In Unbound 1.9.0 up to and including 1.25.1, when a DNSCrypt query is received over TCP, the routine that encrypts the reply in place fails to bound the reply length against the destination buffer size. The size clamp that protects the UDP path is not applied on the TCP path, so a reply larger than 65504 bytes is shifted forward by 48 bytes inside a buffer of capacity equal to 'msg-buffer-size', writing past the end of the heap allocation. A single malicious encrypted query crashes the resolver and lead to denial of service. This vulnerability needs Unbound to be compiled with DNSCrypt support ('--enable-dnscrypt') and the 'dnscrypt:' clause to be configured and enabled for the listening interfaces.
CVSS Score
7.5
EPSS Score
0.003
Published
2026-07-22
In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option.
CVSS Score
3.7
EPSS Score
0.003
Published
2026-07-22
In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query.
CVSS Score
3.7
EPSS Score
0.002
Published
2026-07-22
With NLnet Labs Unbound up to and including version 1.25.1, applications using libunbound and configured with 'unwanted-reply-threshold', could eventually be abruptly terminated if the threshold is reached and libunbound needs to call 'libworker_alloc_cleanup' since the function is absent from the function call allow list. When an application using libunbound sets 'unwanted-reply-threshold' to any non-zero value and the iterator queries an authoritative that replies with enough wrong-transaction-ID UDP datagrams to cross the threshold, the 'libworker_alloc_cleanup' will eventually be called. Since the function is absent from the function call allow list, this leads to a fatal exit of libunbound and eventual termination of the embedding application.Unbound itself is not affected since its relevant function 'worker_alloc_cleanup' is registed in the allow list and proceeds to perform the documented cache flush.
CVSS Score
5.9
EPSS Score
0.003
Published
2026-07-22
CVE-2026-16232
An authentication bypass vulnerability in the Check Point SmartConsole login process allows an unauthenticated remote attacker to obtain an application login token and use it to authenticate with full administrative privileges. Successful exploitation allows the attacker to modify security policies and security configurations. Remote exploitation requires internet access to the Management Server IP address and a configuration that does not restrict Trusted Clients. Check Point is aware that this vulnerability is being exploited and has affected a very small number of customers.
Known exploited
CVSS Score
9.1
EPSS Score
0.127
Published
2026-07-22