Linux: >> Linux Kernel >> 5.15.156 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
io-wq: check that the predecessor is hashed in io_wq_remove_pending()
io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled
work was the tail of its hash bucket. When doing this, it checks whether
the preceding entry in acct->work_list has the same hash value, but
never checks that the predecessor is hashed at all. io_get_work_hash()
is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash
bits are never set for non-hashed work, so it returns 0. Thus, when a
hashed bucket-0 work is cancelled while a non-hashed work is its list
predecessor, the check spuriously passes and a pointer to the non-hashed
io_kiocb is stored in wq->hash_tail[0].
Because non-hashed work is dequeued via the fast path in
io_get_next_work(), which never touches hash_tail[], the stale pointer
is never cleared. Therefore, after the non-hashed io_kiocb completes and
is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The
io_wq is per-task (tctx->io_wq) and survives ring open/close, so the
dangling pointer persists for the lifetime of the task; the next hashed
bucket-0 enqueue dereferences it in io_wq_insert_work() and
wq_list_add_after() writes through freed memory.
Add the missing io_wq_is_hashed() check so a non-hashed predecessor
never inherits a hash_tail[] slot.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities.
CVSS Score
7.8
EPSS Score
0.002
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
ibmveth: Disable GSO for packets with small MSS
Some physical adapters on Power systems do not support segmentation
offload when the MSS is less than 224 bytes. Attempting to send such
packets causes the adapter to freeze, stopping all traffic until
manually reset.
Implement ndo_features_check to disable GSO for packets with small MSS
values. The network stack will perform software segmentation instead.
The 224-byte minimum matches ibmvnic
commit <f10b09ef687f> ("ibmvnic: Enforce stronger sanity checks
on GSO packets")
which uses the same physical adapters in SEA configurations.
The issue occurs specifically when the hardware attempts to perform
segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets
(gso_segs == 1) do not trigger the problematic LSO code path and are
transmitted normally without segmentation.
Add an ndo_features_check callback to disable GSO when MSS < 224 bytes.
Also call vlan_features_check() to ensure proper handling of VLAN packets,
particularly QinQ (802.1ad) configurations where the hardware parser may
not support certain offload features.
Validated using iptables to force small MSS values. Without the fix,
the adapter freezes. With the fix, packets are segmented in software
and transmission succeeds. Comprehensive regression testing completedd
(MSS tests, performance, stability).
CVSS Score
8.6
EPSS Score
0.004
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets.
CVSS Score
9.1
EPSS Score
0.003
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: shdlc: Stop timers and work before freeing context
llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc
structure while its timers and state machine work may still be active.
Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state
and the skb queues. If teardown happens in parallel with a queued/running
work item, it can lead to UAF and other shutdown races.
Stop all SHDLC timers and cancel sm_work synchronously before purging the
queues and freeing the context.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
CVSS Score
8.4
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
pstore/ram: fix buffer overflow in persistent_ram_save_old()
persistent_ram_save_old() can be called multiple times for the same
persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz
for PSTORE_TYPE_DMESG records).
Currently, the function only allocates prz->old_log when it is NULL,
but it unconditionally updates prz->old_log_size to the current buffer
size and then performs memcpy_fromio() using this new size. If the
buffer size has grown since the first allocation (which can happen
across different kernel boot cycles), this leads to:
1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls
2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer
using the incorrect (larger) old_log_size
The KASAN splat would look similar to:
BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x...
Read of size N at addr ... by task ...
The conditions are likely extremely hard to hit:
0. Crash with a ramoops write of less-than-record-max-size bytes.
1. Reboot: ramoops registers, pstore_get_records(0) reads old crash,
allocates old_log with size X
2. Crash handler registered, timer started (if pstore_update_ms >= 0)
3. Oops happens (non-fatal, system continues)
4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X)
5. pstore_new_entry = 1, pstore_timer_kick() called
6. System continues running (not a panic oops)
7. Timer fires after pstore_update_ms milliseconds
8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1)
9. ramoops_get_next_prz() → persistent_ram_save_old()
10. buffer_size() returns Y, but old_log is X bytes
11. Y > X: memcpy_fromio() overflows heap
Requirements:
- a prior crash record exists that did not fill the record size
(almost impossible since the crash handler writes as much as it
can possibly fit into the record, capped by max record size and
the kmsg buffer almost always exceeds the max record size)
- pstore_update_ms >= 0 (disabled by default)
- Non-fatal oops (system survives)
Free and reallocate the buffer when the new size differs from the
previously allocated size. This ensures old_log always has sufficient
space for the data being copied.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
AppArmor: Allow apparmor to handle unaligned dfa tables
The dfa tables can originate from kernel or userspace and 8-byte alignment
isn't always guaranteed and as such may trigger unaligned memory accesses
on various architectures. Resulting in the following
[ 73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720
[ 74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdrom
sd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common
[ 74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE
[ 74.536543] Call Trace:
[ 74.568561] [<0000000000434c24>] dump_stack+0x8/0x18
[ 74.633757] [<0000000000476438>] __warn+0xd8/0x100
[ 74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74
[ 74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720
[ 74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0
[ 74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300
[ 74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0
[ 75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160
[ 75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280
[ 75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100
[ 75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420
[ 75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0
[ 75.406932] [<0000000000767174>] sys_write+0x14/0x40
[ 75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44
[ 75.548802] ---[ end trace 0000000000000000 ]---
[ 75.609503] dfa blob stream 0xfff0000008926b96 not aligned.
[ 75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720
Work around it by using the get_unaligned_xx() helpers.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03