Linux: >> Linux Kernel >> 5.10.19 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: legousbtower: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked")
CVSS Score
7.8
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
usbip: vudc: fix NULL deref in vep_dequeue()
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Call trace:
vep_dequeue+0x1c/0xe4 (P)
usb_ep_dequeue+0x14/0x20
ffs_aio_cancel+0x24/0x34
__arm64_sys_io_cancel+0xb0/0x124
do_el0_svc+0x68/0x100
el0_svc+0x18/0x5c
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
partitions: aix: bound the pp_count scan to the ppe array
aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:
int numpps = be16_to_cpu(pvd->pp_count);
...
for (i = 0; i < numpps; i += 1) {
struct ppe *p = pvd->ppe + i;
...
lp_ix = be16_to_cpu(p->lp_ix);
pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the
on-disk pp_count. pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd->ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).
The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -> aix_partition().
Clamp the scan to the number of entries the ppe[] array can hold.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page
nvmet_execute_disc_get_log_page() validates only the dword alignment
of the host-supplied Log Page Offset (lpo). The 64-bit offset is then
added to a small kzalloc'd buffer that holds the discovery log page
and the result is passed straight to nvmet_copy_to_sgl(), which
memcpy()s data_len bytes out to the host with no source-side bound
check:
u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */
size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */
...
if (offset & 0x3) { ... } /* only check */
...
alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req);
buffer = kzalloc(alloc_len, GFP_KERNEL);
...
status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len);
The Discovery controller is unauthenticated -- nvmet_host_allowed()
returns true unconditionally for the discovery subsystem -- so the call
is reachable pre-authentication by any TCP/RDMA/FC peer that can reach
the nvmet target. With a discovery log page of ~1 KiB, an attacker
requesting up to 4 KiB starting at offset == alloc_len reads the next
slab page out and gets its content returned over the fabric (an
empirical run on a default nvmet-tcp loopback target leaked 81
canonical kernel pointers in one Get Log Page response). Pointing the
offset at unmapped kernel memory faults the in-kernel memcpy and
crashes (or panics, on panic_on_oops=1) the target host instead.
The attacker-controlled source-side offset pattern
"nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique
to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every
other Get Log Page handler in admin-cmd.c either ignores lpo (and
silently starts every response at offset 0) or tracks a local
destination offset with a fixed source pointer.
Validate the host-supplied offset against the log page size, cap the
copy length to what is actually available, and zero-fill any remainder
of the host transfer buffer. The zero-fill matches the existing
short-response pattern in nvmet_execute_get_log_changed_ns()
(admin-cmd.c) and prevents leaking transport SGL contents when the
host asks for more bytes than the log page contains.
CVSS Score
9.1
EPSS Score
0.007
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
crypto: ecc - Fix carry overflow in vli multiplication
The carry flag calculation fails when r01.m_high is saturated
(0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows.
The condition (r01.m_high < product.m_high) doesn't handle the case
where r01.m_high == product.m_high and an additional carry exists
from lower-bit overflow.
When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")
introduced crypto/ecc.c, it split the muladd() function in the
micro-ecc library into separate mul_64_64() and add_128_128() helpers.
It seems the check got lost in translation.
Add proper handling for this boundary by accounting for the carry
from the lower addition.
CVSS Score
8.8
EPSS Score
0.004
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled.
CVSS Score
7.0
EPSS Score
0.001
Published
2026-07-25