Linux: >> Linux Kernel >> 6.10.1 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
netpoll: fix a use-after-free on shutdown path
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material.
CVSS Score
7.8
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
gpio: sch: use raw_spinlock_t in the irq startup path
sch_irq_unmask() enables the GPIO IRQ and then updates the controller
state through sch_irq_mask_unmask(), which takes sch->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and
used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported:
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the SCH controller lock to raw_spinlock_t. The same lock is
also used by the GPIO direction and value callbacks, but those critical
sections only update MMIO-backed GPIO registers and do not contain
sleepable operations. Keeping this register lock non-sleeping is
therefore appropriate for the irqchip callbacks and does not change the
GPIO-side locking contract.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place.
CVSS Score
7.0
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix NULL pointer dereference in debugfs
shrinker_debugfs_add() creates both "count" and "scan" debugfs files
unconditionally.
That assumes every shrinker implements both count_objects() and
scan_objects(), which is not guaranteed. For example, the xen-backend
shrinker sets count_objects() but leaves scan_objects() NULL, so writing
to its scan file calls through a NULL function pointer and panics the
kernel:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Call Trace:
<TASK>
shrinker_debugfs_scan_write+0x12e/0x270
full_proxy_write+0x5f/0x90
vfs_write+0xde/0x420
? filp_flush+0x75/0x90
? filp_close+0x1d/0x30
? do_dup2+0xb8/0x120
ksys_write+0x68/0xf0
? filp_flush+0x75/0x90
do_syscall_64+0xb3/0x5b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The count path has the same issue in principle if a shrinker omits
count_objects().
To fix it, only create "count" and "scan" debugfs files when the
corresponding callbacks are present.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix shrinker_info teardown race with expansion
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
Reading the debugfs "count" file of a memcg-aware shrinker can sleep
inside an RCU read-side critical section:
BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421
RCU nest depth: 1, expected: 0
css_rstat_flush
mem_cgroup_flush_stats
zswap_shrinker_count
shrinker_debugfs_count_show
shrinker_debugfs_count_show() invokes the ->count_objects() callback under
rcu_read_lock(). The zswap callback flushes memcg stats via
css_rstat_flush(), which may sleep, so it must not run under RCU.
The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally
and returns a memcg holding a css reference (dropped on the next iteration
or by mem_cgroup_iter_break()), so the memcg stays alive without it. The
shrinker is kept alive by the open debugfs file: shrinker_free() removes
the debugfs entries via debugfs_remove_recursive(), which waits for
in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb).
The sibling "scan" handler already invokes the sleeping ->scan_objects()
callback with no RCU section.
Drop the rcu_read_lock()/rcu_read_unlock().
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
mfd: cros_ec: Delay dev_set_drvdata() until probe success
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0
CVSS Score
7.0
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference.
CVSS Score
8.8
EPSS Score
0.004
Published
2026-07-25