Linux: >> Linux Kernel >> 2.6.25 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved:
netfilter: require Ethernet MAC header before using eth_hdr()
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`.
CVSS Score
9.4
EPSS Score
0.004
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved:
net: hamradio: 6pack: fix uninit-value in sixpack_receive_buf
sixpack_receive_buf() does not properly skip bytes with TTY error flags.
The while loop iterates through the flags buffer but never advances the
data pointer (cp), and passes the original count (including error bytes)
to sixpack_decode(). This causes sixpack_decode() to process bytes that
should have been skipped due to TTY errors. The TTY layer does not
guarantee that cp[i] holds a meaningful value when fp[i] is set, so
passing those positions to sixpack_decode() results in KMSAN reporting
an uninit-value read.
Fix this by processing bytes one at a time, advancing cp on each
iteration, and only passing valid (non-error) bytes to sixpack_decode().
This matches the pattern used by slip_receive_buf() and
mkiss_receive_buf() for the same purpose.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate group add input before caching
[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():
kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7bbfb55a966d
[CAUSE]
ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a
user-controlled group block before ocfs2_verify_group_and_input()
validates that block number. That helper is only valid for newly
allocated metadata and asserts that the block is not already present in
the chosen metadata cache. The code also uses INODE_CACHE(inode) even
though the group descriptor belongs to main_bm_inode and later journal
accesses use that cache context instead.
[FIX]
Validate the on-disk group descriptor before caching it, then add it to
the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the
validation failure path separate from the later cleanup path so we only
remove the buffer from that cache after it has actually been inserted.
This keeps the group buffer lifetime consistent across validation,
journaling, and cleanup.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: remove sprintf usage
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..]
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()
syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()
when accessing skb->len for tx statistics after usb_submit_urb() has
been called:
BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760
drivers/net/usb/rtl8150.c:712
Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226
The URB completion handler write_bulk_callback() frees the skb via
dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU
in softirq context before usb_submit_urb() returns in the submitter,
so by the time the submitter reads skb->len the skb has already been
queued to the per-CPU completion_queue and freed by net_tx_action():
CPU A (xmit) CPU B (USB completion softirq)
------------ ------------------------------
dev->tx_skb = skb;
usb_submit_urb() --+
|-------> write_bulk_callback()
| dev_kfree_skb_irq(dev->tx_skb)
| net_tx_action()
| napi_skb_cache_put() <-- free
netdev->stats.tx_bytes |
+= skb->len; <-- UAF read
Fix it by caching skb->len before submitting the URB and using the
cached value when updating the tx_bytes counter.
The pre-existing tx_bytes semantics are preserved: the counter tracks
the original frame length (skb->len), not the ETH_ZLEN/USB-alignment
padded "count" value that is handed to the device. Changing that
would be a user-visible accounting change and is out of scope for
this UAF fix.
CVSS Score
9.8
EPSS Score
0.005
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK ***
CVSS Score
7.5
EPSS Score
0.005
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
CVSS Score
7.1
EPSS Score
0.001
Published
2026-06-24