Linux: >> Linux Kernel >> 3.5.2 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
net/tcp-md5: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
CVSS Score
9.4
EPSS Score
0.004
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
CVSS Score
8.8
EPSS Score
0.003
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE
device and then reassigned an ISA device:
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...);
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);
If the first lookup succeeds but the second fails, dev becomes NULL. This
leads to a potential null-pointer dereference when dev_dbg() is called:
if (errata.piix4.bmisx)
dev_dbg(&dev->dev, ...);
To prevent this, use two temporary pointers and retrieve each device
independently, avoiding overwriting dev with a possible NULL value.
[ rjw: Subject adjustment, added an empty code line ]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
dm: remove fake timeout to avoid leak request
Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of
blk_mq_complete_request"), drivers are responsible for calling
blk_should_fake_timeout() at appropriate code paths and opportunities.
However, the dm driver does not implement its own timeout handler and
relies on the timeout handling of its slave devices.
If an io-timeout-fail error is injected to a dm device, the request
will be leaked and never completed, causing tasks to hang indefinitely.
Reproduce:
1. prepare dm which has iscsi slave device
2. inject io-timeout-fail to dm
echo 1 >/sys/class/block/dm-0/io-timeout-fail
echo 100 >/sys/kernel/debug/fail_io_timeout/probability
echo 10 >/sys/kernel/debug/fail_io_timeout/times
3. read/write dm
4. iscsiadm -m node -u
Result: hang task like below
[ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds.
[ 862.244133] Tainted: G E 6.19.0-rc1+ #51
[ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000
[ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi]
[ 862.245264] Call Trace:
[ 862.245587] <TASK>
[ 862.245814] __schedule+0x810/0x15c0
[ 862.246557] schedule+0x69/0x180
[ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120
[ 862.247688] elevator_change+0x16d/0x460
[ 862.247893] elevator_set_none+0x87/0xf0
[ 862.248798] blk_unregister_queue+0x12e/0x2a0
[ 862.248995] __del_gendisk+0x231/0x7e0
[ 862.250143] del_gendisk+0x12f/0x1d0
[ 862.250339] sd_remove+0x85/0x130 [sd_mod]
[ 862.250650] device_release_driver_internal+0x36d/0x530
[ 862.250849] bus_remove_device+0x1dd/0x3f0
[ 862.251042] device_del+0x38a/0x930
[ 862.252095] __scsi_remove_device+0x293/0x360
[ 862.252291] scsi_remove_target+0x486/0x760
[ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi]
[ 862.252886] process_one_work+0x633/0xe50
[ 862.253101] worker_thread+0x6df/0xf10
[ 862.253647] kthread+0x36d/0x720
[ 862.254533] ret_from_fork+0x2a6/0x470
[ 862.255852] ret_from_fork_asm+0x1a/0x30
[ 862.256037] </TASK>
Remove the blk_should_fake_timeout() check from dm, as dm has no
native timeout handling and should not attempt to fake timeouts.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ensure that won't go past CPER allocated record
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
[ rjw: Subject tweaks ]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Add sanity check for OOB writes at silencing
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-06