Linux: >> Linux Kernel >> 5.15.197 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
smb: client: mask server-provided mode to 07777 in modefromsid
When modefromsid is active, parse_dacl() applies the server-provided
sub_auth[2] value from the NFS mode SID to cf_mode without masking to
07777. Apply the correct masking, same as in the read path.
CVSS Score
7.1
EPSS Score
0.003
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely.
CVSS Score
8.2
EPSS Score
0.004
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer.
CVSS Score
7.8
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the
two-phase _OSC negotiation. Between the two calls it freed
output.pointer but left output.length unchanged. Since
acpi_evaluate_object() treats a non-zero length with a non-NULL
pointer as an existing buffer to write into, the second call wrote
into freed memory (use-after-free). The subsequent kfree(output.pointer)
at out_free then freed the same pointer a second time (double free).
Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER
after freeing the first result, so ACPICA allocates a fresh buffer for
each phase independently.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ]
CVSS Score
4.7
EPSS Score
0.002
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT
RT migration is done aggressively. When a CPU schedules out a high
priority RT task for a lower priority task, it will look to see if there's
any RT tasks that are waiting to run on another CPU that is of higher
priority than the task this CPU is about to run. If it finds one, it will
pull that task over to the CPU and allow it to run there instead.
Normally, this pulling is done by looking at the RT overloaded mask (rto)
which contains all the CPUs in the scheduler domain with RT tasks that are
waiting to run due to a higher priority RT task currently running on their
CPU. The CPU that is about to schedule a lower priority task will grab the
rq lock of the overloaded CPU and move the RT task from that CPU's runqueue
to the local one and schedule the higher priority RT task.
This caused issues when a lot of CPUs would schedule a lower priority task
at the same time. They would all try to grab the same runqueue lock of
the CPU with the overloaded RT tasks. Only the first CPU that got in will
get that task. All the others would wait until they got the runqueue lock
and see there's nothing to pull and do nothing. On systems with lots of
CPUs, this caused a large latency (up to 500us) which is beyond what
PREEMPT_RT is to allow.
The solution to that was to create an RT_PUSH_IPI logic. When any CPU
wanted to pull a task, instead of grabbing the runqueue lock of the
overloaded CPU, it would start by sending an IPI to the overloaded CPU,
and that IPI handler would have the CPU with the waiting RT task do a push
instead. Then that handler would send an IPI to the next CPU with
overloaded RT tasks, and so on. Note, after the first CPU starts this
process, if another CPU wanted to do a pull, it would see that the process
has already begun and would only increment a counter to have the IPIs
continue again.
The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause
a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded
context on PREEMPT_RT but they can run in an interrupt context in non-RT.
If an IPI lands on a CPU that has just woken up multiple RT tasks and the
current CPU is running a non RT or a low priority RT task, instead of
doing a push, it would simply do a schedule on that CPU. But if a softirq
was also executing on this CPU, the schedule would need to wait until the
softirq finished. Until then, the CPU would still be considered overloaded
as there are RT tasks still waiting to run on it.
A live lock occurred on a workload that was doing heavy networking traffic
on a large machine where the softirqs would run 500us out of 750us. And it
would also be waking up RT tasks, causing the RT pull logic to be
constantly executed.
When a softirq triggered on a CPU with RT tasks queued but not running
yet, and the other CPUs would see this CPU as being overloaded, they would
send an IPI over to it. The CPU would notice that the waiting RT tasks are
of higher priority than the currently running task and simply schedule
that CPU instead. But because the softirq was executing, before it could
schedule, it would receive another IPI to do the same. The amount of IPIs
would slow down the currently running softirq so much that before it could
return back to task context, it would execute another softirq never
allowing the CPU to schedule. This live locked that CPU.
As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if
PREEMPT_RT is not enabled.
CVSS Score
7.5
EPSS Score
0.005
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc_pid_get_link() and proc_pid_readlink() currently look up the task from
the pid once, then do the ptrace access check on that task, then look up
the task from the pid a second time to do the actual access.
That's racy in several ways.
To fix it, pass the task to the ->proc_get_link() handler, and instead of
proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that
looks up and locks the task, does the access check, and calls
->proc_get_link().
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-25
In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-25