Linux: >> Linux Kernel >> 4.9.323 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
8021q: delete cleared egress QoS mappings
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
Sashiko points out that pd->uctx isn't initialized until late in the
function so all these error flow references are NULL and will crash. Use
the uctx that isn't NULL.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
ipmi: Check event message buffer response for bad data
The event message buffer response data size got checked later when
processing, but check it right after the response comes back. It
appears some BMCs may return an empty message instead of an error
when fetching events.
There are apparently some new BMCs that make this error, so we need to
compensate.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs.
CVSS Score
7.5
EPSS Score
0.006
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix slab-out-of-bounds access in auth message processing
If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY
contains a positive value in its result field, it is treated as an
error code by ceph_handle_auth_reply() and returned to
handle_auth_reply(). Thereafter, an attempt is made to send the
preallocated message of type CEPH_MSG_AUTH, where the returned value is
interpreted as the size of the front segment to send. If the result
value in the message is greater than the size of the memory buffer
allocated for the front segment, an out-of-bounds access occurs, and
the content of the memory region beyond this buffer is sent out.
This patch fixes the issue by treating only negative values in the
result field as errors. Positive values are therefore treated as success
in the same way as a zero value. Additionally, a BUG_ON is added to
__send_prepared_auth_request() comparing the len parameter to
front_alloc_len to prevent sending the message if it exceeds the bounds
of the allocation and to make it easier to catch any logic flaws leading
to this.
CVSS Score
9.1
EPSS Score
0.005
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
wifi: b43: enforce bounds check on firmware key index in b43_rx()
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
dm-thin: fix metadata refcount underflow
There's a bug in dm-thin in the function rebalance_children. If the
internal btree node has one entry, the code tries to copy all btree
entries from the node's child to the node itself and then decrement the
child's reference count.
If the child node is shared (it has reference count > 1), we won't free
it, so there would be two pointers to each of the grandchildren nodes.
But the reference counts of the grandchildren is not increased, thus the
reference count doesn't match the number of pointers that point to the
grandchildren. This results in "device mapper: space map common: unable
to decrement block" errors.
Fix this bug by incrementing reference counts on the grandchildren if the
btree node is shared.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-28