Linux: >> Linux Kernel >> 2.6.34.8 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in crush_decode()
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK ***
CVSS Score
7.5
EPSS Score
0.006
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong
timeout value` warning was observed, accompanied by SMBus controller
state machine corruption.
The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of
10 ms. The user argument is checked against INT_MAX, but it is
subsequently multiplied by 10 before being passed to msecs_to_jiffies().
A malicious user can pass a large value (e.g., 429496729) that passes
the `arg > INT_MAX` check but overflows when multiplied by 10. This
results in a truncated 32-bit unsigned value that bypasses the
internal `(int)m < 0` check in `msecs_to_jiffies()`.
The truncated value is then assigned to `client->adapter->timeout`
(a signed 32-bit int), which is reinterpreted as a negative number.
When passed to wait_for_completion_timeout(), this negative value
undergoes sign extension to a 64-bit unsigned long, triggering the
`schedule_timeout` warning and causing premature returns. This leaves
the SMBus state machine in an unrecoverable state, constituting a
local Denial of Service (DoS).
Fix this by bounding the user argument to `INT_MAX / 10`.
[wsa: move the comment as well]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
CVSS Score
7.1
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
CVSS Score
8.8
EPSS Score
0.003
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_policy: fix strict mode inbound policy matching
match_policy_in() walks sec_path entries from the last transform to the
first one, but strict policy matching needs to consume info->pol[] in
the same forward order as the rule layout.
Derive the strict-match policy position from the number of transforms
already consumed so that multi-element inbound rules are matched
consistently.
CVSS Score
8.3
EPSS Score
0.003
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
dm: fix a buffer overflow in ioctl processing
Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the
function retrieve_status:
1. The code in retrieve_status checks that the output string fits into
the output buffer and writes the output string there
2. Then, the code aligns the "outptr" variable to the next 8-byte
boundary:
outptr = align_ptr(outptr);
3. The alignment doesn't check overflow, so outptr could point past the
buffer end
4. The "for" loop is iterated again, it executes:
remaining = len - (outptr - outbuf);
5. If "outptr" points past "outbuf + len", the arithmetics wraps around
and the variable "remaining" contains unusually high number
6. With "remaining" being high, the code writes more data past the end of
the buffer
Luckily, this bug has no security implications because:
1. Only root can issue device mapper ioctls
2. The commonly used libraries that communicate with device mapper
(libdevmapper and devicemapper-rs) use buffer size that is aligned to
8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input
buffer and the bug can't happen accidentally
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-08
In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets.
CVSS Score
9.1
EPSS Score
0.003
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent
without proper RCU protection, which leads to:
cpu 0 cpu 1
----- -----
do_task_stat
var = task->real_parent
release_task
call_rcu(delayed_put_task_struct)
task_tgid_nr_ns(var)
rcu_read_lock <--- Too late to protect task->real_parent!
task_pid_ptr <--- UAF!
rcu_read_unlock
This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add
proper RCU protection for accessing task->real_parent.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-03