Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 5.15.100  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp into line with them.
CVSS Score
9.1
EPSS Score
0.005
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: update file PMD counter before folio_put() __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put().
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space.
CVSS Score
7.8
EPSS Score
0.002
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow.
CVSS Score
8.1
EPSS Score
0.002
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix sk_ack_backlog leak on failed handshake When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_bvec_write_partial() zram_read_page() picks the sync or async backing device read path based on whether the parent bio is NULL. zram_bvec_write_partial() passes its parent bio down, so for ZRAM_WB slots the read is dispatched asynchronously and zram_read_page() returns 0 while the bio is still in flight. The caller then runs memcpy_from_bvec(), zram_write_page() and __free_page() on the buffer, leaving the async read to write into a freed page. zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d ("zram: fix synchronous reads") for the same reason; the write_partial counterpart was missed.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved: fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-25


Contact Us

Shodan ® - All rights reserved