In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL
A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on
conn->async_requests via setup_async_work(), with cancel_fn =
smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock.
When the request is cancelled, the worker frees the file_lock with
locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never
reaches release_async_work() -- the only site that unlinks the work from
conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays
matchable on async_requests with a live cancel_fn pointing at the freed file_lock,
until connection teardown finally runs release_async_work().
smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second
SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs
smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (cancelled branch)
... cache file_lock_cache of size 192
Reproduced on mainline with KASAN by an authenticated SMB client.
Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback
cannot be fired a second time.
In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf
netvsc_copy_to_send_buf() copies page buffer entries into the VMBus
send buffer using phys_to_virt() on the entry PFN. Entries for the
RNDIS header and the skb linear data come from kmalloc'd memory and
are always in the kernel direct map, but entries for skb fragments
reference page cache or user pages, which on 32-bit x86 with
CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page
phys_to_virt() returns an address outside the direct map and the
subsequent memcpy() faults on the transmit softirq path, which is
fatal.
Map the pages with kmap_local_page() instead, handling two properties
of the page buffer entries:
- pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity,
not a native PFN. Reconstruct the physical address first and derive
the native page from it, so the mapping stays correct where
PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages).
- Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN
grouping in the page buffer array"), an entry describes a full
physically contiguous fragment and pb[i].len can exceed PAGE_SIZE,
while kmap_local_page() maps a single page. Copy page by page,
splitting at native page boundaries.
The copy path only handles packets smaller than the send section size
(6144 bytes by default); larger packets take the cp_partial path where
only the RNDIS header is copied. So entries here are bounded by the
section size and a copy is split at most once on 4K-page systems. On
!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and
no mapping work is added.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: bound SRP_RSP sense copy by the received length
srp_process_rsp() copies sense data from rsp->data + resp_data_len,
where resp_data_len is the full 32-bit value supplied by the SRP target
and is never checked against the number of bytes actually received
(wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so
at most 96 bytes are copied, but the source offset is not bounded.
A malicious or compromised SRP target on the InfiniBand/RoCE fabric that
the initiator has logged into can return an SRP_RSP with
SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer
is allocated at the target-chosen max_ti_iu_len, so the source of the
sense copy lands past the bytes actually received; with resp_data_len
near 0xFFFFFFFF it is gigabytes past the buffer and the read faults.
Copy the sense data only if it has not been truncated, that is, only if
the response header, the response data, and the sense region fit within
the bytes actually received; otherwise drop the sense and log. The
in-tree iSER and NVMe-RDMA receive paths already bound their parse by
wc->byte_len; this brings ib_srp into line with them.
In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: update file PMD counter before folio_put()
__split_huge_pmd_locked() updates the file/shmem RSS counter after
dropping the PMD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put().
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: kl5kusb105: fix bulk-out buffer overflow
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied.
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space.
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow.
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix buffer over-read in rtw_update_protection
rtw_update_protection() is called with a pointer offset into the
ies buffer but the full ie_length is passed, causing a potential
buffer over-read.
In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path.