Vulnerabilities
Vulnerable Software
Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops DSA replaces the conduit (master) device's ethtool_ops with its own wrappers that aggregate stats from both the conduit and DSA switch ports. Taking the lock again inside the DSA wrappers causes a deadlock. Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y (which looks like some kind of testing device that auto-populates the ports of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero coverage for DSA stuff with real ops locked devs. Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from the DSA conduit ethtool wrappers.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: net: mana: Use pci_name() for debugfs directory naming Use pci_name(pdev) for the per-device debugfs directory instead of hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The previous approach had two issues: 1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs in environments like generic VFIO passthrough or nested KVM, causing a NULL pointer dereference. 2. Multiple PFs would all use "0", and VFs across different PCI domains or buses could share the same slot name, leading to -EEXIST errors from debugfs_create_dir(). pci_name(pdev) returns the unique BDF address, is always valid, and is unique across the system.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: pinctrl: pinconf-generic: Fully validate 'pinmux' property The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property is not empty when present. This might be not true. With that, the allocator will give a special value in return and not NULL which lead to the crash when trying to access that (invalid) memory. Fix that by fully validating 'pinmux' value, including its length.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: power: supply: max77705: Free allocated workqueue and fix removal order Use devm interface for allocating workqueue to fix two bugs at the same time: 1. Driver leaks the memory on remove(), because the workqueue is not destroyed. 2. Driver allocates workqueue and then registers interrupt handlers with devm interface. This means that probe error paths will not use a reversed order, but first destroy the workqueue and then, via devm release handlers, free the interrupt. The interrupt handler schedules work on this exact workqueue, thus if interrupt is hit in this short time window - after destroying workqueue, but before devm() frees the interrupt - the schedulled work will lead to use of freed memory. Change is not equivalent in the workqueue itself: use non-legacy API which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is used to update power supply (power_supply_changed()) status, thus there is no point to run it for memory reclaim. Note that dev_name() is not directly used in second argument to prevent possible unlikely parsing any "%" character in device name as format.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison The local-vs-remote region comparison loop uses '<=' instead of '<', causing it to read one entry past the valid range of qr_regions. The other loops in the same function correctly use '<'. Fix the loop condition to use '<' for consistency and correctness.
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix cross-fabric target timeout lookup When a fabric receives an error interrupt, the error may have occurred on a different fabric. The target timeout lookup was using the wrong base address (cbb->regs) with offsets from a different fabric's target map, causing a kernel page fault. Unable to handle kernel paging request at virtual address ffff80000954cc00 pc : tegra234_cbb_get_tmo_slv+0xc/0x28 Call trace: tegra234_cbb_get_tmo_slv+0xc/0x28 print_err_notifier+0x6c0/0x7d0 tegra234_cbb_isr+0xe4/0x1b4 Add tegra234_cbb_get_fabric() to look up the correct fabric device using fab_id, and use its base address for accessing target timeout registers.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: fuse: fix uninit-value in fuse_dentry_revalidate() fuse_dentry_revalidate() may be called with a dentry that didn't had ->d_time initialised. The issue was found with KMSAN, where lookup_open() calls __d_alloc(), followed by d_revalidate(), as shown below: ===================================================== BUG: KMSAN: uninit-value in fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394 fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394 d_revalidate fs/namei.c:1030 [inline] lookup_open fs/namei.c:4405 [inline] open_last_lookups fs/namei.c:4583 [inline] path_openat+0x1614/0x64c0 fs/namei.c:4827 do_file_open+0x2aa/0x680 fs/namei.c:4859 [...] Uninit was created at: slab_post_alloc_hook mm/slub.c:4466 [inline] slab_alloc_node mm/slub.c:4788 [inline] kmem_cache_alloc_lru_noprof+0x382/0x1280 mm/slub.c:4807 __d_alloc+0x55/0xa00 fs/dcache.c:1740 d_alloc_parallel+0x99/0x2740 fs/dcache.c:2604 lookup_open fs/namei.c:4398 [inline] open_last_lookups fs/namei.c:4583 [inline] path_openat+0x135f/0x64c0 fs/namei.c:4827 do_file_open+0x2aa/0x680 fs/namei.c:4859 [...] =====================================================
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Remove overflows on the invalidation path Since RISC-V supports a sign extended page table it should support a gather->end of ULONG_MAX, but if this happens it will infinite loop because of the overflow. Also avoid overflow computing the length by moving the +1 to the other side of the <
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fixes the below: ../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961) ../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-26
In the Linux kernel, the following vulnerability has been resolved: padata: Put CPU offline callback in ONLINE section to allow failure syzbot reported the following warning: DEAD callback error for CPU1 WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614 at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux") which tglx traced to padata_cpu_dead() given it's the only sub-CPUHP_TEARDOWN_CPU callback that returns an error. Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU so move the CPU offline callback to the ONLINE section where failure is possible.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-26


Contact Us

Shodan ® - All rights reserved