An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS).
If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted.
The following log message can be seen when this issue happens:
agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor>
This issue affects Junos OS on
EX2300, EX3400, EX4000, EX4100 and EX4400
devices:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2.
A Return of Pointer Value Outside of Expected Range vulnerability in the fileio library of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privilged attacker to cause a Denial-of-Service (DoS).
On EX Series, QFX Series and MX Series a low-privileged attacker issuing a specific 'show l2-learning' or 'show ethernet-switching' command will cause an l2ald crash which will lead to a temporary service impact for all layer 2 services until the process has automatically restarted.
This issue affects EX Series, QFX Series, MX Series:
Junos OS:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R1-S2.
Junos OS Evolved:
* all versions before 23.2R2-S7-EVO,
* 23.4 versions before 23.4R2-S8-EVO,
* 24.2 versions before 24.2R2-EVO,
* 24.4 versions before 24.4R1-S3-EVO.
A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on EX Series allows a local, authenticated attacker to cause a Denial-of-Service (DoS).
On EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400 switches, an authenticated, local attacker with no specific permissions or class can execute a specific, privileged CLI 'request' command which will cause complete traffic impact until the system automatically recovers.
This issue affects Junos OS on EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400:
* 23.2R2 versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2,
* 25.4 versions before 25.4R1-S1.
An Incorrect Initialization of Resource vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series and QFX Series device allows an unauthenticated, network-based attacker to cause an integrity impact to downstream networks.
When the same family inet or inet6 filter is applied on an IRB interface and on a physical interface as egress filter on EX4100, EX4400, EX4650 and QFX5120 devices, only one of the two filters will be applied, which can lead to traffic being sent out one of these interfaces which should have been blocked.
This issue affects Junos OS on EX Series and QFX Series:
* 23.4 version 23.4R2-S6,
* 24.2 version 24.2R2-S3.
No other Junos OS versions are affected.
A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS).
When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from.
This issue affects:
Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2.
A Heap-based Buffer Overflow vulnerability in the flexible PIC concentrator (FPC) of Juniper Networks Junos OS on EX2300, EX3400, EX4100, EX4300, EX4300MP, EX4400, EX4600, EX4650-48Y, and QFX5k Series allows an attacker to send a specific DHCP packet to the device, leading to an FPC crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
Under a rare timing scenario outside the attacker's control, memory corruption may be observed when DHCP Option 82 is enabled, leading to an FPC crash and affecting packet forwarding. Due to the nature of the heap-based overflow, exploitation of this vulnerability could also lead to remote code execution within the FPC, resulting in complete control of the vulnerable component.
This issue affects Junos OS on EX2300, EX3400, EX4100, EX4300, EX4300MP, EX4400, EX4600, EX4650-48Y, and QFX5k Series:
* All versions before 21.4R3-S9,
* from 22.2 before 22.2R3-S5,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R2.
An Uncontrolled Resource Consumption vulnerability in the http daemon (httpd) of Juniper Networks Junos OS on SRX Series, QFX Series, MX Series and EX Series allows an unauthenticated, network-based attacker to cause Denial-of-Service (DoS).
An attacker can send specific HTTPS connection requests to the device, triggering the creation of processes that are not properly terminated. Over time, this leads to resource exhaustion, ultimately causing the device to crash and restart.
The following command can be used to monitor the resource usage:
user@host> show system processes extensive | match mgd | count
This issue affects Junos OS on SRX Series and EX Series:
All versions before 21.4R3-S7,
from 22.2 before 22.2R3-S4,
from 22.3 before 22.3R3-S3,
from 22.4 before 22.4R3-S2,
from 23.2 before 23.2R2-S1,
from 23.4 before 23.4R1-S2, 23.4R2.
An Improper Neutralization of Data within XPath Expressions ('XPath Injection') vulnerability in J-Web shipped with Juniper Networks Junos OS allows an unauthenticated, network-based attacker to execute remote commands on the target device.
While an administrator is logged into a J-Web session or has previously logged in and subsequently logged out of their J-Web session, the attacker can arbitrarily execute commands on the target device with the other user's credentials. In the worst case, the attacker will have full control over the device.
This issue affects Junos OS:
* All versions before 21.2R3-S8,
* from 21.4 before 21.4R3-S7,
* from 22.2 before 22.2R3-S4,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3-S2,
* from 23.2 before 23.2R2,
* from 23.4 before 23.4R1-S1, 23.4R2.
A Missing Authentication for Critical Function vulnerability combined with a Generation of Error Message Containing Sensitive Information vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to access sensitive system information.
When a user logs in, a temporary file which contains the configuration of the device (as visible to that user) is created in the /cache folder. An unauthenticated attacker can then attempt to access such a file by sending a specific request to the device trying to guess the name of such a file. Successful exploitation will reveal configuration information.
This issue affects Juniper Networks Junos OS on SRX Series and EX Series:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S6;
* 22.1 versions earlier than 22.1R3-S5;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R3;
* 23.2 versions earlier than 23.2R1-S2, 23.2R2.
An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an attacker to construct a URL that when visited by another user enables the attacker to execute commands with the target's permissions, including an administrator.
A specific invocation of the emit_debug_note method in webauth_operation.php will echo back the data it receives.
This issue affects Juniper Networks Junos OS on SRX Series and EX Series:
* All versions earlier than 20.4R3-S10;
* 21.2 versions earlier than 21.2R3-S8;
* 21.4 versions earlier than 21.4R3-S6;
* 22.1 versions earlier than 22.1R3-S5;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R3-S1;
* 23.2 versions earlier than 23.2R2;
* 23.4 versions earlier than 23.4R2.