A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable.
If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S5,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2-S1,
* 25.4 versions before 25.4R1-S2, 25.4R2.
A Return of Pointer Value Outside of Expected Range vulnerability in the fileio library of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privilged attacker to cause a Denial-of-Service (DoS).
On EX Series, QFX Series and MX Series a low-privileged attacker issuing a specific 'show l2-learning' or 'show ethernet-switching' command will cause an l2ald crash which will lead to a temporary service impact for all layer 2 services until the process has automatically restarted.
This issue affects EX Series, QFX Series, MX Series:
Junos OS:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R1-S2.
Junos OS Evolved:
* all versions before 23.2R2-S7-EVO,
* 23.4 versions before 23.4R2-S8-EVO,
* 24.2 versions before 24.2R2-EVO,
* 24.4 versions before 24.4R1-S3-EVO.
An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).
When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered.
Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE).
When this issue happens the following logs can be observed:
fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default
fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2.
A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS).
In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered.
The memory usage of jdhcpd can be monitored with:
user@host> show system processes extensive | match jdhcpd
This issue affects Junos OS:
* all versions before 22.4R3-S1,
* 23.2 versions before 23.2R2,
* 23.4 versions before 23.4R2.
A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on MX Series allows a local, authenticated user with low privileges to execute specific commands which will lead to a complete compromise of managed devices.
Any user logged in, without requiring specific privileges, can issue 'request csds' CLI operational commands. These commands are only meant to be executed by high privileged or users designated for Juniper Device Manager (JDM) / Connected Security Distributed Services (CSDS) operations as they will impact all aspects of the devices managed via the respective MX.
This issue affects Junos OS on MX Series:
* 24.4 releases before 24.4R2-S3,
* 25.2 releases before 25.2R2.
This issue does not affect Junos OS releases before 24.4.
A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS).
If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory
available to bbe-smgd has been consumed, no new subscribers will be able to login.
The memory utilization of bbe-smgd can be monitored with the following show command:
user@host> show system processes extensive | match bbe-smgd
The below log message can be observed when this limit has been reached:
bbesmgd[<PID>]: %DAEMON-3-SMD_DPROF_RSMON_ERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion
This issue affects Junos OS on MX Series:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2,
* 25.2 versions before 25.2R2.
An Improper Validation of Syntactic Correctness of Input vulnerability in the IPsec library used by kmd and iked of Juniper Networks Junos OS on SRX Series and MX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS).
If an affected device receives a specifically malformed first ISAKMP packet from the initiator, the kmd/iked process will crash and restart, which momentarily prevents new security associations (SAs) for from being established. Repeated exploitation of this vulnerability causes a complete inability to establish new VPN connections.
This issue affects Junos OS on
SRX Series and MX Series:
* all versions before 22.4R3-S9,
* 23.2 version before 23.2R2-S6,
* 23.4 version before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R1-S2, 25.2R2.
A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart.
This issue affects Junos OS on SRX and MX Series:
* all versions before 22.4R3-S7,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2.
A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS).
On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC.
This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue.
This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC:
* all versions before 21.2R3-S10,
* from 21.4 before 21.4R3-S12,
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S1,
* from 25.2 before 25.2R1-S1, 25.2R2.
A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS).
When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from.
This issue affects:
Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:
* all versions before 22.4R3-S8,
* 23.2 versions before 23.2R2-S5,
* 23.4 versions before 23.4R2-S6,
* 24.2 versions before 24.2R2-S2,
* 24.4 versions before 24.4R2.