Zephyrproject: >> Zephyr >> 1.11.0 Security Vulnerabilities
Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator.
The hostname (query) is the caller-supplied name passed through the standard getaddrinfo()/dns_get_addr_info()/dns_resolve_name() path and is influenceable by operators or remote inputs (server names from configuration, parsed URLs, or app-facing interfaces).
On a tightly-sized buffer with no slack (for example a userspace getaddrinfo call where the hostname is copied with k_usermode_string_alloc_copy to exactly strlen+1 bytes), the over-read crosses the allocation boundary; if that boundary is unmapped (guard page, memory-domain boundary under MPU, or an address sanitizer) the over-read faults, causing a denial of service. The over-read bytes are never returned, so there is no information disclosure.
The flaw is compiled only when CONFIG_MDNS_RESOLVER is enabled, exists since v1.10.0, and is fixed by replacing the fixed-length memcmp with a NUL-safe strcmp(ptr, ".local").
CVSS Score
3.7
EPSS Score
0.002
Published
2026-07-05
A race condition in the Zephyr Bluetooth Classic RFCOMM host stack (subsys/bluetooth/host/classic/rfcomm.c) mishandles a simultaneous bidirectional session disconnect. When the local device has initiated a session teardown (state BT_RFCOMM_STATE_DISCONNECTING, DISC sent, RTX timer armed) and the connected peer concurrently sends its own DISC frame for dlci 0, rfcomm_handle_disc() invokes rfcomm_session_disconnected(), which unconditionally forced the session to BT_RFCOMM_STATE_DISCONNECTED without ever calling bt_l2cap_chan_disconnect().
Because the recovery timer was also cancelled and a later UA is ignored in the DISCONNECTED state, the session becomes permanently wedged: the underlying L2CAP channel is never released and the session slot in the fixed bt_rfcomm_pool[CONFIG_BT_MAX_CONN] array is never reclaimed (its conn pointer stays set).
Subsequent bt_rfcomm_dlc_connect() calls on that connection fail with -EINVAL due to the invalid session state, so RFCOMM service is denied for that peer, and repeated occurrences can exhaust the session pool. The DISC frame is peer-controlled over the air, but exploitation requires the peer's DISC to collide with a local-initiated disconnect (a high-complexity timing race). Impact is availability/resource-leak only; there is no memory-safety, confidentiality, or integrity consequence. The defect shipped in released versions (present in v4.4.0 and earlier).
The fix only transitions to DISCONNECTED when the session is not already in DISCONNECTING, preserving the proper L2CAP teardown path.
CVSS Score
3.1
EPSS Score
0.001
Published
2026-06-30
The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was '((length/hop/source/target checks) && (icmp_hdr->code != 0))'. Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated 'length' is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet.
CVSS Score
8.1
EPSS Score
0.002
Published
2026-06-29
Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service.
CVSS Score
7.5
EPSS Score
0.003
Published
2026-06-25
The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME is 255, so the check is always false; the function then memcpy'd up to 255 name bytes and the lookup/readdir paths advanced traversal by an unvalidated de_rec_len. Each directory block is read into a block_size-sized slab buffer, and block_off can be driven near the block end by preceding entries' rec_len, so the 8-byte header read and the subsequent name memcpy can read up to ~263 bytes past the end of the block buffer into adjacent heap/slab memory. On the readdir path those bytes are returned to the caller in fs_dirent.name, leaking adjacent kernel heap memory; a de_rec_len of 0 also causes a zero-progress infinite loop (denial of service), and the unlink path's memmove(de, next, next_reclen) over unvalidated records is an additional OOB read/write source. The defect is reached by any path-based operation (open, stat, unlink, rename, mkdir) or directory listing on a mounted ext2 volume, so a crafted or corrupted ext2 image on attacker-supplied storage (SD card, USB mass storage, or otherwise mounted image) triggers it. Affected: Zephyr ext2 from its introduction in v3.5.0 through v4.4.0. The fix validates rec_len and name_len in the parser and rejects entries whose header does not fit the remaining block or whose rec_len crosses the block boundary in every traversal caller.
CVSS Score
4.9
EPSS Score
0.002
Published
2026-06-23
bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x09 followed by a 2-byte attribute ID) causes a one-byte read past the end of the logical buffer. The parser is reachable from inbound, remote-controlled data: a Bluetooth BR/EDR peer acting as an SDP server returns discovery-response records that are stored verbatim in the client receive buffer and parsed via the public bt_sdp_get_attr()/bt_sdp_has_attr()/bt_sdp_record_parse() helpers. The over-read is bounded to a single byte that is used only as an internal length selector and is never leaked to the attacker; subsequent length checks then reject the malformed record. Realistic impact is therefore limited to an edge-case denial of service (a fault only if the record ends exactly at a mapped-memory boundary, or a deterministic assert panic when CONFIG_ASSERT=y). Affects Zephyr v4.3.0 and v4.4.0; fixed by adding sizeof(type) to the length check.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-06-23
bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The flaw affects ISO receive builds (CONFIG_BT_ISO_RX, selected by the default-off LE Audio options BT_ISO_PERIPHERAL/BT_ISO_CENTRAL/BT_ISO_SYNC_RECEIVER) and has existed since the ISO subsystem was introduced (v2.6.0) through v4.4.0. The fix adds explicit buf->len < sizeof(ts_hdr) and buf->len < sizeof(hdr) checks that drop the buffer before pulling.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-06-23
A remote, unauthenticated BLE peer can trigger a 2-byte out-of-bounds write in the Bluetooth host during L2CAP LE CoC SDU reassembly. When the application enables segmentation (via chan_ops.alloc_buf) and the chosen RX pool has a user_data_size smaller than 2 bytes, the segmentation counter stored in the net_buf user_data area is written out of bounds in l2cap_chan_le_recv_seg (subsys/bluetooth/host/l2cap.c). The observed effects are an AddressSanitizer abort and, without ASan, heap corruption / fatal error.
CVSS Score
7.6
EPSS Score
0.005
Published
2026-06-09
A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a fixed-size buffer using the caller-controlled addrlen value without validating it against the destination size. struct net_sockaddr is an opaque type, so an application can pass an addrlen larger than sizeof(struct net_sockaddr) (for example 128 bytes into a 24-byte stack buffer), causing the memcpy to read and write past the end of the address memory used by the TLS session cache. This out-of-bounds write can lead to a crash and denial of service, and potentially to arbitrary code execution.
CVSS Score
6.3
EPSS Score
0.003
Published
2026-06-04
An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising payloads. The AD parsing loop reads an attacker-controlled length byte (reported_len) and computes reported_len - 3 without checking that reported_len >= 3. When reported_len is less than 3, the subtraction is performed in signed int arithmetic and yields a negative value that bypasses the length guard and is then implicitly converted to a very large size_t when passed to net_buf_simple_pull_mem(). In builds without assertions, this wraps the buffer length and advances the data pointer far out of bounds, so subsequent reads dereference invalid memory. A nearby BLE device can trigger this with a non-connectable advertisement carrying a UUID16 AD structure and a crafted length byte, with no pairing or prior association required, potentially leading to denial of service or arbitrary code execution.
CVSS Score
6.3
EPSS Score
0.002
Published
2026-06-04
Page 1