Bytecodealliance: >> Wasmtime >> 4.0.1 Security Vulnerabilities
Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.
CVSS Score
6.1
EPSS Score
0.0
Published
2026-04-09
Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a possible panic which can happen when a flags-typed component model value is lifted with the Val type. If bits are set outside of the set of flags the component model specifies that these bits should be ignored but Wasmtime will panic when this value is lifted. This panic only affects wasmtime's implementation of lifting into Val, not when using the flags! macro. This additionally only affects flags-typed values which are part of a WIT interface. This has the risk of being a guest-controlled panic within the host which Wasmtime considers a DoS vector. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.
CVSS Score
5.6
EPSS Score
0.0
Published
2026-04-09
Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, On x86-64 platforms with SSE3 disabled Wasmtime's compilation of the f64x2.splat WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but this data is not visible to WebAssembly guests. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.
CVSS Score
4.1
EPSS Score
0.0
Published
2026-04-09
Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.
CVSS Score
6.9
EPSS Score
0.0
Published
2026-04-09
Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.
CVSS Score
5.9
EPSS Score
0.0
Published
2026-04-09
Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of WASI host interfaces are susceptible to guest-controlled resource exhaustion on the host. Wasmtime did not appropriately place limits on resource allocations requested by the guests. This serves as a Denial of Service vector. Wasmtime 24.0.6, 36.0.6, 40.0.4, 41.0.4, and 42.0.0 have all been released with the fix for this issue. These versions do not prevent this issue in their default configuration to avoid breaking preexisting behaviors. All versions of Wasmtime have appropriate knobs to prevent this behavior, and Wasmtime 42.0.0-and-later will have these knobs tuned by default to prevent this issue from happening. There are no known workarounds for this issue without upgrading. Embedders are recommended to upgrade and configure their embeddings as necessary to prevent possibly-malicious guests from triggering this issue.
CVSS Score
6.9
EPSS Score
0.001
Published
2026-02-24
Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.6, 36.0.6, 4.0.04, 41.0.4, and 42.0.0, Wasmtime's implementation of the `wasi:http/types.fields` resource is susceptible to panics when too many fields are added to the set of headers. Wasmtime's implementation in the `wasmtime-wasi-http` crate is backed by a data structure which panics when it reaches excessive capacity and this condition was not handled gracefully in Wasmtime. Panicking in a WASI implementation is a Denial of Service vector for embedders and is treated as a security vulnerability in Wasmtime. Wasmtime 24.0.6, 36.0.6, 40.0.4, 41.0.4, and 42.0.0 patch this vulnerability and return a trap to the guest instead of panicking. There are no known workarounds at this time. Embedders are encouraged to update to a patched version of Wasmtime.
CVSS Score
6.9
EPSS Score
0.0
Published
2026-02-24
Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.4, 33.0.2, and 34.0.2, a bug in Wasmtime's implementation of the WASIp1 set of import functions can lead to a WebAssembly guest inducing a panic in the host (embedder). The specific bug is triggered by calling `path_open` after calling `fd_renumber` with either two equal argument values or a second argument being equal to a previously-closed file descriptor number value. The corrupt state introduced in `fd_renumber` will lead to the subsequent opening of a file descriptor to panic. This panic cannot introduce memory unsafety or allow WebAssembly to break outside of its sandbox, however. There is no possible heap corruption or memory unsafety from this panic. This bug is in the implementation of Wasmtime's `wasmtime-wasi` crate which provides an implementation of WASIp1. The bug requires a specially crafted call to `fd_renumber` in addition to the ability to open a subsequent file descriptor. Opening a second file descriptor is only possible when a preopened directory was provided to the guest, and this is common amongst embeddings. A panic in the host is considered a denial-of-service vector for WebAssembly embedders and is thus a security issue in Wasmtime. This bug does not affect WASIp2 and embedders using components. In accordance with Wasmtime's release process, patch releases are available as 24.0.4, 33.0.2, and 34.0.2. Users of other release of Wasmtime are recommended to move to a supported release of Wasmtime. Embedders who are using components or are not providing guest access to create more file descriptors (e.g. via a preopened filesystem directory) are not affected by this issue. Otherwise, there is no workaround at this time, and affected embeddings are recommended to update to a patched version which will not cause a panic in the host.
CVSS Score
3.5
EPSS Score
0.001
Published
2025-07-18
Wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device filenames with superscript digits, and through them gain access peripheral devices connected to the computer, or network resources mapped to those devices. This can include modems, printers, network printers, and any other device connected to a serial or parallel port, including emulated USB serial ports. Patch releases for Wasmtime have been issued as 24.0.2, 25.0.3, and 26.0.1. Users of Wasmtime 23.0.x and prior are recommended to upgrade to one of these patched versions. There are no known workarounds for this issue. Affected Windows users are recommended to upgrade.
CVSS Score
2.3
EPSS Score
0.003
Published
2024-11-05
Wasmtime is a standalone runtime for WebAssembly. Prior to versions 6.0.2, 7.0.1, and 8.0.1, Wasmtime's implementation of managing per-instance state, such as tables and memories, contains LLVM-level undefined behavior. This undefined behavior was found to cause runtime-level issues when compiled with LLVM 16 which causes some writes, which are critical for correctness, to be optimized away. Vulnerable versions of Wasmtime compiled with Rust 1.70, which is currently in beta, or later are known to have incorrectly compiled functions. Versions of Wasmtime compiled with the current Rust stable release, 1.69, and prior are not known at this time to have any issues, but can theoretically exhibit potential issues.
The underlying problem is that Wasmtime's runtime state for an instance involves a Rust-defined structure called `Instance` which has a trailing `VMContext` structure after it. This `VMContext` structure has a runtime-defined layout that is unique per-module. This representation cannot be expressed with safe code in Rust so `unsafe` code is required to maintain this state. The code doing this, however, has methods which take `&self` as an argument but modify data in the `VMContext` part of the allocation. This means that pointers derived from `&self` are mutated. This is typically not allowed, except in the presence of `UnsafeCell`, in Rust. When compiled to LLVM these functions have `noalias readonly` parameters which means it's UB to write through the pointers.
Wasmtime's internal representation and management of `VMContext` has been updated to use `&mut self` methods where appropriate. Additionally verification tools for `unsafe` code in Rust, such as `cargo miri`, are planned to be executed on the `main` branch soon to fix any Rust-level issues that may be exploited in future compiler versions.
Precomplied binaries available for Wasmtime from GitHub releases have been compiled with at most LLVM 15 so are not known to be vulnerable. As mentioned above, however, it's still recommended to update.
Wasmtime version 6.0.2, 7.0.1, and 8.0.1 have been issued which contain the patch necessary to work correctly on LLVM 16 and have no known UB on LLVM 15 and earlier. If Wasmtime is compiled with Rust 1.69 and prior, which use LLVM 15, then there are no known issues. There is a theoretical possibility for undefined behavior to exploited, however, so it's recommended that users upgrade to a patched version of Wasmtime. Users using beta Rust (1.70 at this time) or nightly Rust (1.71 at this time) must update to a patched version to work correctly.
CVSS Score
3.9
EPSS Score
0.001
Published
2023-04-27
Page 1